From: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
Some platforms have an issue with BT LED when the interface is
down or BT radio is turned off, which takes 5 seconds to BT LED
goes off. This command turns off the BT LED immediately.
This patch sends the Intel vendor command to turn off the LED.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
---
drivers/bluetooth/btintel.c | 17 +++++++++++++++++
drivers/bluetooth/btintel.h | 1 +
drivers/bluetooth/btusb.c | 11 +++++++++--
3 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 65ecf2ae9a10..4e72d806387c 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -1757,7 +1757,9 @@ EXPORT_SYMBOL_GPL(btintel_setup_combined);
int btintel_shutdown_combined(struct hci_dev *hdev)
{
+ struct btintel_data *intel = hci_get_priv(hdev);
struct sk_buff *skb;
+ int ret;
/* Send HCI Reset to the controller to stop any BT activity which
* were triggered. This will help to save power and maintain the
@@ -1770,6 +1772,21 @@ int btintel_shutdown_combined(struct hci_dev *hdev)
}
kfree_skb(skb);
+
+ /* Some platforms have an issue with BT LED when the interface is
+ * down or BT radio is turned off, which takes 5 seconds to BT LED
+ * goes off. This command turns off the BT LED immediately.
+ */
+ if (test_bit(INTEL_BROKEN_LED, &intel->flags)) {
+ skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ ret = PTR_ERR(skb);
+ bt_dev_err(hdev, "turning off Intel device LED failed");
+ return ret;
+ }
+ kfree_skb(skb);
+ }
+
return 0;
}
EXPORT_SYMBOL_GPL(btintel_shutdown_combined);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 29b678364a79..4a35762c3220 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -144,6 +144,7 @@ struct intel_debug_features {
#define INTEL_FIRMWARE_FAILED 3
#define INTEL_BOOTING 4
#define INTEL_BROKEN_READ_VERSION 5
+#define INTEL_BROKEN_LED 6
struct btintel_data {
unsigned long flags;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a64473c525eb..8f87c600d026 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -63,6 +63,7 @@ static struct usb_driver btusb_driver;
#define BTUSB_INTEL_NEWGEN 0x2000000
#define BTUSB_INTEL_COMBINED 0x4000000
#define BTUSB_INTEL_BROKEN_READ_VERSION 0x8000000
+#define BTUSB_INTEL_BROKEN_LED 0x10000000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@@ -378,13 +379,16 @@ static const struct usb_device_id blacklist_table[] = {
BTUSB_VALID_LE_STATES },
{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
- BTUSB_INTEL_BROKEN_READ_VERSION },
+ BTUSB_INTEL_BROKEN_READ_VERSION |
+ BTUSB_INTEL_BROKEN_LED },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
- BTUSB_INTEL_BROKEN_READ_VERSION },
+ BTUSB_INTEL_BROKEN_READ_VERSION |
+ BTUSB_INTEL_BROKEN_LED },
{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
BTUSB_INTEL_BROKEN_READ_VERSION |
+ BTUSB_INTEL_BROKEN_LED |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW |
BTUSB_WIDEBAND_SPEECH |
@@ -4327,6 +4331,9 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_INTEL_BROKEN_READ_VERSION)
btintel_set_flags(hdev, INTEL_BROKEN_READ_VERSION);
+
+ if (id->driver_info & BTUSB_INTEL_BROKEN_LED)
+ btintel_set_flags(hdev, INTEL_BROKEN_LED);
}
if (id->driver_info & BTUSB_INTEL_NEW) {
--
2.25.1
