From: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
There are multiple setup and shutdown functions for Intel device and the
setup function to use is depends on the USB PID/VID, which makes
difficult to maintain the code and increases the code size.
This patch adds combined setup and shutdown functions to provide a
single entry point for all Intel devices and choose the setup functions
based on the information read with HCI_Intel_Read_Version command.
Starting from TyP device, for HCI_Intel_Read_Version command, the
command parameter and response are changed even though OCF remains
same. Luckly the legacy devices still can handle the command without
error even if it has a extra parameter, so it uses the new command
format to support both legacy and new (tlv based) format.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
---
drivers/bluetooth/btintel.c | 196 ++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btintel.h | 12 +++
2 files changed, 208 insertions(+)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index e44b6993cf91..a23304435814 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -236,6 +236,8 @@ int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
* compatibility options when newer hardware variants come along.
*/
switch (ver->hw_variant) {
+ case 0x07: /* WP - Legacy ROM */
+ case 0x08: /* StP - Legacy ROM */
case 0x0b: /* SfP */
case 0x0c: /* WsP */
case 0x11: /* JfP */
@@ -250,9 +252,15 @@ int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
}
switch (ver->fw_variant) {
+ case 0x01:
+ variant = "Legacy ROM 2.5";
+ break;
case 0x06:
variant = "Bootloader";
break;
+ case 0x22:
+ variant = "Legacy ROM 2.x";
+ break;
case 0x23:
variant = "Firmware";
break;
@@ -483,6 +491,98 @@ int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
}
EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
+static int btintel_parse_version_tlv(struct hci_dev *hdev,
+ struct intel_version_tlv *version,
+ struct sk_buff *skb)
+{
+ /* Consume Command Complete Status field */
+ skb_pull(skb, 1);
+
+ /* Event parameters contatin multiple TLVs. Read each of them
+ * and only keep the required data. Also, it use existing legacy
+ * version field like hw_platform, hw_variant, and fw_variant
+ * to keep the existing setup flow
+ */
+ while (skb->len) {
+ struct intel_tlv *tlv;
+
+ tlv = (struct intel_tlv *)skb->data;
+ switch (tlv->type) {
+ case INTEL_TLV_CNVI_TOP:
+ version->cnvi_top = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_CNVR_TOP:
+ version->cnvr_top = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_CNVI_BT:
+ version->cnvi_bt = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_CNVR_BT:
+ version->cnvr_bt = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_DEV_REV_ID:
+ version->dev_rev_id = get_unaligned_le16(tlv->val);
+ break;
+ case INTEL_TLV_IMAGE_TYPE:
+ version->img_type = tlv->val[0];
+ break;
+ case INTEL_TLV_TIME_STAMP:
+ /* If image type is Operational firmware (0x03), then
+ * running FW Calendar Week and Year information can
+ * be extracted from Timestamp information
+ */
+ version->min_fw_build_cw = tlv->val[0];
+ version->min_fw_build_yy = tlv->val[1];
+ version->timestamp = get_unaligned_le16(tlv->val);
+ break;
+ case INTEL_TLV_BUILD_TYPE:
+ version->build_type = tlv->val[0];
+ break;
+ case INTEL_TLV_BUILD_NUM:
+ /* If image type is Operational firmware (0x03), then
+ * running FW build number can be extracted from the
+ * Build information
+ */
+ version->min_fw_build_nn = tlv->val[0];
+ version->build_num = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_SECURE_BOOT:
+ version->secure_boot = tlv->val[0];
+ break;
+ case INTEL_TLV_OTP_LOCK:
+ version->otp_lock = tlv->val[0];
+ break;
+ case INTEL_TLV_API_LOCK:
+ version->api_lock = tlv->val[0];
+ break;
+ case INTEL_TLV_DEBUG_LOCK:
+ version->debug_lock = tlv->val[0];
+ break;
+ case INTEL_TLV_MIN_FW:
+ version->min_fw_build_nn = tlv->val[0];
+ version->min_fw_build_cw = tlv->val[1];
+ version->min_fw_build_yy = tlv->val[2];
+ break;
+ case INTEL_TLV_LIMITED_CCE:
+ version->limited_cce = tlv->val[0];
+ break;
+ case INTEL_TLV_SBE_TYPE:
+ version->sbe_type = tlv->val[0];
+ break;
+ case INTEL_TLV_OTP_BDADDR:
+ memcpy(&version->otp_bd_addr, tlv->val, tlv->len);
+ break;
+ default:
+ /* Ignore rest of information */
+ break;
+ }
+ /* consume the current tlv and move to next*/
+ skb_pull(skb, tlv->len + sizeof(*tlv));
+ }
+
+ return 0;
+}
+
int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
{
struct sk_buff *skb;
@@ -1272,6 +1372,102 @@ int btintel_set_debug_features(struct hci_dev *hdev,
}
EXPORT_SYMBOL_GPL(btintel_set_debug_features);
+int btintel_setup_combined(struct hci_dev *hdev)
+{
+ const u8 param[1] = { 0xFF };
+ struct intel_version ver;
+ struct intel_version_tlv ver_tlv;
+ struct sk_buff *skb;
+ int err;
+
+ BT_DBG("%s", hdev->name);
+
+ /* Starting from TyP device, the command parameter and response are
+ * changed even though the OCF for HCI_Intel_Read_Version command
+ * remains same. The legacy devices can handle even if the
+ * command has a parameter and returns a correct version information.
+ * So, it uses new format to support both legacy and new format.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel version command failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ /* Check the status */
+ if (skb->data[0]) {
+ bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+ skb->data[0]);
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ /* For Legacy device, check the HW platform value and size */
+ if (skb->data[1] == 0x37 && skb->len == sizeof(ver)) {
+ bt_dev_dbg(hdev, "Read the legacy Intel version information");
+
+ memcpy(&ver, skb->data, sizeof(ver));
+
+ /* Display version information */
+ btintel_version_info(hdev, &ver);
+
+ /* Identify the device type based on the read version */
+ switch (ver.hw_variant) {
+ case 0x07: /* WP */
+ case 0x08: /* StP */
+ /* Legacy ROM product */
+ /* TODO: call setup routine for legacy rom product */
+ break;
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ case 0x11: /* JfP */
+ case 0x12: /* ThP */
+ case 0x13: /* HrP */
+ case 0x14: /* CcP */
+ /* TODO: call setup routine for bootloader product */
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
+ ver.hw_variant);
+ return -EINVAL;
+ }
+
+ return err;
+ }
+
+ /* For TLV type device, parse the tlv data */
+ btintel_parse_version_tlv(hdev, &ver_tlv, skb);
+
+ /* Display version information of TLV type */
+ btintel_version_info_tlv(hdev, &ver_tlv);
+
+ /* TODO: Need to filter the device for new generation */
+ /* TODO: call setup routine for tlv based bootloader product */
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(btintel_setup_combined);
+
+int btintel_shutdown_combined(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+
+ /* Send HCI Reset to the controller to stop any BT activity which
+ * were triggered. This will help to save power and maintain the
+ * sync b/w Host and controller
+ */
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "HCI reset during shutdown failed");
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_shutdown_combined);
+
MODULE_AUTHOR("Marcel Holtmann <marcel@xxxxxxxxxxxx>");
MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index d184064a5e7c..68ffa84fa87a 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -165,6 +165,8 @@ int btintel_read_boot_params(struct hci_dev *hdev,
struct intel_boot_params *params);
int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
const struct firmware *fw, u32 *boot_param);
+int btintel_setup_combined(struct hci_dev *hdev);
+int btintel_shutdown_combined(struct hci_dev *hdev);
int btintel_download_firmware_newgen(struct hci_dev *hdev,
struct intel_version_tlv *ver,
const struct firmware *fw,
@@ -283,6 +285,16 @@ static inline int btintel_download_firmware(struct hci_dev *dev,
return -EOPNOTSUPP;
}
+static inline int btintel_setup_combined(struct hci_dev *hdev)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int btintel_shutdown_combined(struct hci_dev *hdev)
+{
+ return -EOPNOTSUPP;
+}
+
static inline int btintel_download_firmware_newgen(struct hci_dev *hdev,
const struct firmware *fw,
u32 *boot_param,
--
2.25.1
