[PATCH AUTOSEL 4.19 52/55] Bluetooth: btusb: fix bt fiwmare downloading failure issue for qca btsoc.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tim Jiang <tjiang@xxxxxxxxxxxxxx>

[ Upstream commit 4f00bfb372674d586c4a261bfc595cbce101fbb6 ]

This is btsoc timing issue, after host start to downloading bt firmware,
ep2 need time to switch from function acl to function dfu, so host add
20ms delay as workaround.

Signed-off-by: Tim Jiang <tjiang@xxxxxxxxxxxxxx>
Signed-off-by: Marcel Holtmann <marcel@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/bluetooth/btusb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 1b0adf5c2376..7188f0fb2e05 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2595,6 +2595,11 @@ static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
 	sent += size;
 	count -= size;
 
+	/* ep2 need time to switch from function acl to function dfu,
+	 * so we add 20ms delay here.
+	 */
+	msleep(20);
+
 	while (count) {
 		size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
 
-- 
2.30.2




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux