Hi Kiran,
>>> Adds callback function which is called to set the data path for HFP
>>> offload case before opening SCO connection
>>>
>>> Signed-off-by: Kiran K <kiran.k@xxxxxxxxx>
>>> Reviewed-by: Chethan T N <chethan.tumkur.narayan@xxxxxxxxx>
>>> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@xxxxxxxxx>
>>> ---
>>> drivers/bluetooth/btintel.c | 50
>> +++++++++++++++++++++++++++++++++++++
>>> drivers/bluetooth/btintel.h | 8 ++++++
>>> drivers/bluetooth/btusb.c | 4 ++-
>>> include/net/bluetooth/hci.h | 8 ++++++
>>> 4 files changed, 69 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
>>> index 95c6a1bef35e..3eba5c587ef6 100644
>>> --- a/drivers/bluetooth/btintel.c
>>> +++ b/drivers/bluetooth/btintel.c
>>> @@ -1308,6 +1308,56 @@ int btintel_read_offload_usecases(struct
>>> hci_dev *hdev, } EXPORT_SYMBOL_GPL(btintel_read_offload_usecases);
>>>
>>> +int btintel_set_data_path(struct hci_dev *hdev, __u8 type,
>>> + struct bt_codec *codec)
>>> +{
>>> + __u8 preset;
>>> + struct hci_op_configure_data_path *cmd;
>>> + __u8 buffer[255];
>>> + struct sk_buff *skb;
>>> +
>>> + if (type != SCO_LINK && type != ESCO_LINK)
>>> + return -EINVAL;
>>> +
>>> + switch (codec->id) {
>>> + case 0x02:
>>> + preset = 0x00;
>>> + break;
>>> + case 0x05:
>>> + preset = 0x01;
>>> + break;
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + cmd = (void *)buffer;
>>> + cmd->data_path_id = 0x01;
>>> + cmd->len = 1;
>>> + cmd->data[0] = preset;
>>> +
>>> + cmd->direction = 0x00;
>>> + skb = __hci_cmd_sync(hdev, HCI_CONFIGURE_DATA_PATH,
>> sizeof(*cmd) + 1,
>>> + cmd, HCI_INIT_TIMEOUT);
>>> + if (IS_ERR(skb)) {
>>> + bt_dev_err(hdev, "configure input data path failed (%ld)",
>>> + PTR_ERR(skb));
>>> + return PTR_ERR(skb);
>>> + }
>>> + kfree_skb(skb);
>>> +
>>> + cmd->direction = 0x01;
>>> + skb = __hci_cmd_sync(hdev, HCI_CONFIGURE_DATA_PATH,
>> sizeof(*cmd) + 1,
>>> + cmd, HCI_INIT_TIMEOUT);
>>> + if (IS_ERR(skb)) {
>>> + bt_dev_err(hdev, "configure output data path failed (%ld)",
>>> + PTR_ERR(skb));
>>> + return PTR_ERR(skb);
>>> + }
>>> + kfree_skb(skb);
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(btintel_set_data_path);
>>> +
>>> MODULE_AUTHOR("Marcel Holtmann <marcel@xxxxxxxxxxxx>");
>>> MODULE_DESCRIPTION("Bluetooth support for Intel devices ver "
>>> VERSION); MODULE_VERSION(VERSION); diff --git
>>> a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h index
>>> 9bcc489680db..9806970c9871 100644
>>> --- a/drivers/bluetooth/btintel.h
>>> +++ b/drivers/bluetooth/btintel.h
>>> @@ -183,6 +183,8 @@ int btintel_set_debug_features(struct hci_dev
>>> *hdev, int btintel_read_offload_usecases(struct hci_dev *hdev,
>>> struct intel_offload_usecases *usecases); int
>>> btintel_get_data_path(struct hci_dev *hdev);
>>> +int btintel_set_data_path(struct hci_dev *hdev, __u8 type,
>>> + struct bt_codec *codec);
>>> #else
>>>
>>> static inline int btintel_check_bdaddr(struct hci_dev *hdev) @@ -325,4
>>> +327,10 @@ static int btintel_get_data_path(struct hci_dev *hdev) {
>>> return -EOPNOTSUPP;
>>> }
>>> +
>>> +static int btintel_set_data_path(struct hci_dev *hdev, __u8 type,
>>> + struct bt_codec *codec)
>>> +{
>>> + return -EOPNOTSUPP;
>>> +}
>>> #endif
>>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>>> index 1e51beec5776..afafa44752a1 100644
>>> --- a/drivers/bluetooth/btusb.c
>>> +++ b/drivers/bluetooth/btusb.c
>>> @@ -3012,8 +3012,10 @@ static int btusb_setup_intel_newgen(struct
>> hci_dev *hdev)
>>> err = btintel_read_offload_usecases(hdev, &usecases);
>>> if (!err) {
>>> /* set get_data_path callback if offload is supported */
>>> - if (usecases.preset[0] & 0x03)
>>> + if (usecases.preset[0] & 0x03) {
>>> hdev->get_data_path = btintel_get_data_path;
>>> + hdev->set_data_path = btintel_set_data_path;
>>> + }
>>> }
>>
>>> /* Read the Intel version information after loading the FW */ diff
>>> --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
>>> index 31a5ac8918fc..42963188dcea 100644
>>> --- a/include/net/bluetooth/hci.h
>>> +++ b/include/net/bluetooth/hci.h
>>> @@ -1250,6 +1250,14 @@ struct hci_rp_read_local_oob_ext_data {
>>> __u8 rand256[16];
>>> } __packed;
>>>
>>> +#define HCI_CONFIGURE_DATA_PATH 0x0c83
>>> +struct hci_op_configure_data_path {
>>> + __u8 direction;
>>> + __u8 data_path_id;
>>> + __u8 len;
>>> + __u8 data[];
>>> +} __packed;
>>> +
>>
>> if this is a standard HCI command, why is this done as hdev->set_data_path?
>> This makes no sense too me.
> Intel uses HCI_CONFIGURE_DATA_PATH to command to set the preset ID (NBS, WBS, ...). Here len and data[] are vendor specific. I should have prefixed these fields with vnd_. I will address this in next patchset.
if the command is defined by the Bluetooth SIG, it is handle in the core. However if it needs vendor specific input that we need a callback for just that data.
Regards
Marcel
