Re: [PATCH v1] Bluetooth: btintel: Support Digital(N) + RF(N-1) combination

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kiran,

> New generation Intel controllers(N) need to support RF from (N-1)
> generation. Since PID comes from OTP present in RF module,
> *setup* function gets mapped to BTUSB_INTEL_NEW instead of
> BTUSB_INTEL_NEWGEN. This patch checks generation of CNVi in
> *setup* of BTUSB_INTEL_NEW and maps callbacks to BTUSB_INTEL_NEWGEN
> if new generation controller is found and attempts *setup* of
> BTUSB_INTEL_NEWGEN.
> 
> Signed-off-by: Kiran K <kiran.k@xxxxxxxxx>
> Reviewed-by: Chethan T N <chethan.tumkur.narayan@xxxxxxxxx>
> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@xxxxxxxxx>
> ---
> drivers/bluetooth/btintel.c | 119 ++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btintel.h |  10 +++
> drivers/bluetooth/btusb.c   |  45 +++++++++++++-
> net/bluetooth/hci_core.c    |   5 +-
> 4 files changed, 177 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
> index e44b6993cf91..1d9ecc481f14 100644
> --- a/drivers/bluetooth/btintel.c
> +++ b/drivers/bluetooth/btintel.c
> @@ -483,6 +483,85 @@ int btintel_version_info_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
> }
> EXPORT_SYMBOL_GPL(btintel_version_info_tlv);
> 
> +void btintel_parse_version_tlv(struct hci_dev *hdev, struct sk_buff *skb,
> +			       struct intel_version_tlv *version)
> +{
> +	/* Consume Command Complete Status field */
> +	skb_pull(skb, sizeof(__u8));
> +
> +	/* Event parameters contatin multiple TLVs. Read each of them
> +	 * and only keep the required data. Also, it use existing legacy
> +	 * version field like hw_platform, hw_variant, and fw_variant
> +	 * to keep the existing setup flow
> +	 */
> +	while (skb->len) {
> +		struct intel_tlv *tlv;
> +
> +		tlv = (struct intel_tlv *)skb->data;
> +		switch (tlv->type) {
> +		case INTEL_TLV_CNVI_TOP:
> +			version->cnvi_top = get_unaligned_le32(tlv->val);
> +			break;

I think we already had this issue that you need to check that enough data is actually in the SKB.

> +		case INTEL_TLV_CNVR_TOP:
> +			version->cnvr_top = get_unaligned_le32(tlv->val);
> +			break;
> +		case INTEL_TLV_CNVI_BT:
> +			version->cnvi_bt = get_unaligned_le32(tlv->val);
> +			break;
> +		case INTEL_TLV_CNVR_BT:
> +			version->cnvr_bt = get_unaligned_le32(tlv->val);
> +			break;
> +		case INTEL_TLV_DEV_REV_ID:
> +			version->dev_rev_id = get_unaligned_le16(tlv->val);
> +			break;
> +		case INTEL_TLV_IMAGE_TYPE:
> +			version->img_type = tlv->val[0];
> +			break;
> +		case INTEL_TLV_TIME_STAMP:
> +			version->timestamp = get_unaligned_le16(tlv->val);
> +			break;
> +		case INTEL_TLV_BUILD_TYPE:
> +			version->build_type = tlv->val[0];
> +			break;
> +		case INTEL_TLV_BUILD_NUM:
> +			version->build_num = get_unaligned_le32(tlv->val);
> +			break;
> +		case INTEL_TLV_SECURE_BOOT:
> +			version->secure_boot = tlv->val[0];
> +			break;
> +		case INTEL_TLV_OTP_LOCK:
> +			version->otp_lock = tlv->val[0];
> +			break;
> +		case INTEL_TLV_API_LOCK:
> +			version->api_lock = tlv->val[0];
> +			break;
> +		case INTEL_TLV_DEBUG_LOCK:
> +			version->debug_lock = tlv->val[0];
> +			break;
> +		case INTEL_TLV_MIN_FW:
> +			version->min_fw_build_nn = tlv->val[0];
> +			version->min_fw_build_cw = tlv->val[1];
> +			version->min_fw_build_yy = tlv->val[2];
> +			break;
> +		case INTEL_TLV_LIMITED_CCE:
> +			version->limited_cce = tlv->val[0];
> +			break;
> +		case INTEL_TLV_SBE_TYPE:
> +			version->sbe_type = tlv->val[0];
> +			break;
> +		case INTEL_TLV_OTP_BDADDR:
> +			memcpy(&version->otp_bd_addr, tlv->val, tlv->len);
> +			break;
> +		default:
> +			/* Ignore rest of information */
> +			break;
> +		}
> +		/* consume the current tlv and move to next*/
> +		skb_pull(skb, tlv->len + sizeof(*tlv));
> +	}
> +}
> +EXPORT_SYMBOL_GPL(btintel_parse_version_tlv);
> +
> int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *version)
> {
> 	struct sk_buff *skb;
> @@ -595,6 +674,46 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver
> }
> EXPORT_SYMBOL_GPL(btintel_read_version_tlv);
> 
> +int btintel_generic_read_version(struct hci_dev *hdev,
> +				 struct intel_version_tlv *ver_tlv,
> +				 struct intel_version *ver, bool *is_tlv)
> +{
> +	struct sk_buff *skb;
> +	const u8 param[1] = { 0xFF };
> +
> +	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
> +			   PTR_ERR(skb));
> +		return PTR_ERR(skb);
> +	}
> +
> +	if (skb->data[0]) {
> +		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
> +			   skb->data[0]);
> +		kfree_skb(skb);
> +		return -EIO;
> +	}
> +
> +	if (skb->len < sizeof(struct intel_version))
> +		return -EILSEQ;
> +
> +	if (skb->len == sizeof(struct intel_version) &&
> +	    skb->data[1] == 0x37)
> +		*is_tlv = false;
> +	else
> +		*is_tlv = true;
> +
> +	if (*is_tlv)
> +		btintel_parse_version_tlv(hdev, skb, ver_tlv);
> +	else
> +		memcpy(ver, skb->data, sizeof(*ver));
> +
> +	kfree_skb(skb);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(btintel_generic_read_version);
> +

I have the feeling that we are falling back to a patch that I already rejected.

> /* ------- REGMAP IBT SUPPORT ------- */
> 
> #define IBT_REG_MODE_8BIT  0x00
> diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
> index d184064a5e7c..366cb746f9c4 100644
> --- a/drivers/bluetooth/btintel.h
> +++ b/drivers/bluetooth/btintel.h
> @@ -175,6 +175,10 @@ int btintel_read_debug_features(struct hci_dev *hdev,
> 				struct intel_debug_features *features);
> int btintel_set_debug_features(struct hci_dev *hdev,
> 			       const struct intel_debug_features *features);
> +int btintel_generic_read_version(struct hci_dev *hdev,
> +				 struct intel_version_tlv *ver_tlv,
> +				 struct intel_version *ver,
> +				 bool *is_tlv);
> #else
> 
> static inline int btintel_check_bdaddr(struct hci_dev *hdev)
> @@ -307,4 +311,10 @@ static inline int btintel_set_debug_features(struct hci_dev *hdev,
> 	return -EOPNOTSUPP;
> }
> 
> +static int btintel_generic_read_version(struct hci_dev *hdev,
> +					struct intel_version_tlv *ver_tlv,
> +					struct intel_version *ver, bool *is_tlv)
> +{
> +	return -EOPNOTSUPP;
> +}
> #endif
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index a9855a2dd561..15d91aae52cc 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -583,6 +583,9 @@ struct btusb_data {
> 	unsigned cmd_timeout_cnt;
> };
> 
> +static int btusb_setup_intel_newgen(struct hci_dev *hdev);
> +static int btusb_shutdown_intel_new(struct hci_dev *hdev);
> +
> static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
> {
> 	struct btusb_data *data = hci_get_drvdata(hdev);
> @@ -2842,6 +2845,18 @@ static int btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr)
> 	return err;
> }
> 
> +static bool btintel_is_newgen_controller(struct hci_dev *hdev, u32 cnvi)
> +{
> +	switch (cnvi & 0xFFF) {
> +	case 0x400: /* Slr */
> +	case 0x401: /* Slr-F */
> +	case 0x410: /* TyP */
> +	case 0x810: /* Mgr */
> +		return true;
> +	}
> +	return false;
> +}
> +
> static int btusb_setup_intel_new(struct hci_dev *hdev)
> {
> 	struct btusb_data *data = hci_get_drvdata(hdev);
> @@ -2851,6 +2866,8 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
> 	char ddcname[64];
> 	int err;
> 	struct intel_debug_features features;
> +	struct intel_version_tlv ver_tlv;
> +	bool is_tlv;
> 
> 	BT_DBG("%s", hdev->name);
> 
> @@ -2864,12 +2881,38 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
> 	 * is in bootloader mode or if it already has operational firmware
> 	 * loaded.
> 	 */
> -	err = btintel_read_version(hdev, &ver);
> +	err = btintel_generic_read_version(hdev, &ver_tlv, &ver, &is_tlv);
> 	if (err) {
> 		bt_dev_err(hdev, "Intel Read version failed (%d)", err);
> 		btintel_reset_to_bootloader(hdev);
> 		return err;
> 	}
> +	if (is_tlv) {
> +		/* We got TLV data. Check for new generation CNVi. If present,
> +		 * then map the callbacks to BTUSB_INTEL_NEWGEN and attempt
> +		 * setup function again
> +		 */
> +		if (btintel_is_newgen_controller(hdev, ver_tlv.cnvi_top)) {
> +			hdev->send = btusb_send_frame_intel;
> +			hdev->setup = btusb_setup_intel_newgen;

So this is a clear no, your are not changing hdev->setup within hdev->setup.

> +			hdev->shutdown = btusb_shutdown_intel_new;
> +			hdev->hw_error = btintel_hw_error;
> +			hdev->set_diag = btintel_set_diag;
> +			hdev->set_bdaddr = btintel_set_bdaddr;
> +			hdev->cmd_timeout = btusb_intel_cmd_timeout;
> +			return -EAGAIN;
> +		}
> +
> +		/* we need to read legacy version here to minimize the changes
> +		 * and keep the esixiting flow
> +		 */
> +		err = btintel_read_version(hdev, &ver);
> +		if (err) {
> +			bt_dev_err(hdev, "Intel Read version failed (%d)", err);
> +			btintel_reset_to_bootloader(hdev);
> +			return err;
> +		}
> +	}
> 
> 	err = btintel_version_info(hdev, &ver);
> 	if (err)
> diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
> index 1eb7ffd0dd29..8e407bad0e31 100644
> --- a/net/bluetooth/hci_core.c
> +++ b/net/bluetooth/hci_core.c
> @@ -1496,8 +1496,11 @@ static int hci_dev_do_open(struct hci_dev *hdev)
> 
> 		hci_sock_dev_event(hdev, HCI_DEV_SETUP);
> 
> -		if (hdev->setup)
> +		if (hdev->setup) {
> 			ret = hdev->setup(hdev);
> +			if (ret && ret == -EAGAIN)
> +				ret = hdev->setup(hdev);
> +		}

NO. Please stop hacking here. I think you need to take a whiteboard and draw how our controllers are initialized.

Regards

Marcel




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux