From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
According Realteks own BT drivers firmware RTL8761B is for UART
and RTL8761BU is for USB.
Change existing 8761B to UART and add an 8761BU entry for USB
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
---
drivers/bluetooth/btrtl.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index e7fe5fb22753..ccef8b2cfee2 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -132,12 +132,19 @@ static const struct id_table ic_id_table[] = {
.cfg_name = "rtl_bt/rtl8761a_config" },
/* 8761B */
- { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+ { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
.config_needed = false,
.has_rom_version = true,
.fw_name = "rtl_bt/rtl8761b_fw.bin",
.cfg_name = "rtl_bt/rtl8761b_config" },
+ /* 8761BU */
+ { IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+ .config_needed = false,
+ .has_rom_version = true,
+ .fw_name = "rtl_bt/rtl8761bu_fw.bin",
+ .cfg_name = "rtl_bt/rtl8761bu_config" },
+
/* 8822C with UART interface */
{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
.config_needed = true,
--
2.31.1
