Re: [PATCH 5.12 regression fix] Bluetooth: btusb: Revert Fix the autosuspend enable and disable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 2/25/21 5:37 AM, Hui Wang wrote:
> 
> On 2/19/21 5:24 PM, Hans de Goede wrote:
>> Hi,
>>
>> On 2/19/21 12:41 AM, Luiz Augusto von Dentz wrote:
>>> Hi Hans,
>>>
>>> On Thu, Feb 18, 2021 at 2:08 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>>>> Hi Marcel,
>>>>
>>>> On 2/18/21 9:01 PM, Marcel Holtmann wrote:
>>>>> Hi Hans,
>>>>>
>>>>>
> Hi Marcel and Hans,
> 
> Looks like this reverting patch is not applied yet, If it is already applied, please ignore the below content.
> 
> My patch really introduces a regression, that makes the autosuspend can't be enabled by btusb.c anymore.
> 
> When the usb core layer calls the usb_driver->probe(), the autosuspend is disabled by pm_runtime_forbid(), if users set btusb.enable_autosuspend=1 or enable the CONFIG_BT_HCIBTUSB_AUTOSUSPEND, the probe() should enable the autosuspend by calling usb_enable_autosuspend() which will call pm_runtime_allow().
> 
> For keeping balance, when executing disconnect(), if probe() enabled the autosuspend, disconect() should disable it by calling usb_disable_autosuspend() which will call pm_runtime_forbid(). This could guarantee the kernel parameter enable_autosuspend works as expected when users repeatedly run "rmmod btusb;modporbe btusb enable_autosuspend=1/0".
> 
> The users could also enable or disable autosuspend by echoing "auto" or "on" to /sys/.../power/control, btusb doesn't know users change the autosuspend from userspace, so btusb only keeps the autosuspend balanced in itself, and userspace should keep balance from userspace, btusb has no capability to detect and control the userspace operation.

There is no balance this is not a (reference)counted thing. It is a straight forward bool,
which is either enabled or disabled. So who or what-ever sets its value last *wins*
there is *no balancing* / *no counting* !

All drivers using this to opt-in to auto-suspend by default call usb_enable_autosuspend()
from their probe function and leave it at that, without making any further calls on remove.

What is necessary here is a straight-forward revert of your commit, as I submitted and
nothing else.

If you can reply with an Acked-by or Reviewed-by to my original revert/patch then
that would be greatly appreciated.

Regards,

Hans


p.s.

Calling usb_disable_autosuspend(data->udev) on driver unbind is a bad idea
because it would break like e.g. this:

1. userspace writes auto to /sys/.../power/control, as is done from
udev rules as we have seen already, or could be done manually
by the user. The device now autosuspends

2. btusb binds, the devices now autosuspends when not in use

3. btusb unbinds and disables autosuspend

4. The device is now constant on despite userspace having requested
that it should be autosuspended.

With just a straight forward revert this problem does not happen.








> According to this idea, the fixing patch is like below:

Again this is WRONG. Please STOP submitting patches for code where
you clearly do not grasp the full implications of the changes which
you are making.





> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 52683fd22e05..a0811e00a5a7 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -4849,8 +4849,8 @@ static int btusb_probe(struct usb_interface *intf,
>                         data->diag = NULL;
>         }
> 
> -       if (!enable_autosuspend)
> -               usb_disable_autosuspend(data->udev);
> +       if (enable_autosuspend)
> +               usb_enable_autosuspend(data->udev);
> 
>         err = hci_register_dev(hdev);
>         if (err < 0)
> @@ -4888,6 +4888,10 @@ static void btusb_disconnect(struct usb_interface *intf)
> 
>         hci_unregister_dev(hdev);
> 
> +       /* if the autosuspend is enabled in _probe, we disable it here for keeping balance */
> +       if (enable_autosuspend)
> +               usb_disable_autosuspend(data->udev);
> +
>         if (intf == data->intf) {
>                 if (data->isoc)
> usb_driver_release_interface(&btusb_driver, data->isoc);
> @@ -4910,9 +4914,6 @@ static void btusb_disconnect(struct usb_interface *intf)
>                 gpiod_put(data->reset_gpio);
> 
>         hci_free_dev(hdev);
> -
> -       if (!enable_autosuspend)
> -               usb_enable_autosuspend(data->udev);
>  }
> 
> Regards,
> 
> Hui.
> 
>> }
>>
>> static int btusb_close(struct hci_dev *hdev)
>> {
>>     ...
>>     data->intf->needs_remote_wakeup = 0;
>>     ...
>> }
>>
>> Regards,
>>
>> Hans
>>
> 




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux