From: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
This moves duplicated code for waiting firmware download to complete to
a function that can then be reused.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
---
drivers/bluetooth/btusb.c | 148 +++++++++++++++++---------------------
1 file changed, 66 insertions(+), 82 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8d343bf33438..64c62a19df69 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2804,6 +2804,68 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
return err;
}
+static int btusb_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ ktime_t delta, rettime;
+ unsigned long long duration;
+ int err;
+
+ bt_dev_info(hdev, "Waiting for device to boot");
+
+ err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(msec));
+ if (err == -EINTR) {
+ bt_dev_err(hdev, "Device boot interrupted");
+ return -EINTR;
+ }
+
+ if (err) {
+ bt_dev_err(hdev, "Device boot timeout");
+ return -ETIMEDOUT;
+ }
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+ return 0;
+}
+
+static int btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ ktime_t calltime;
+ int err;
+
+ calltime = ktime_get();
+
+ set_bit(BTUSB_BOOTING, &data->flags);
+
+ err = btintel_send_intel_reset(hdev, boot_addr);
+ if (err) {
+ bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+ btintel_reset_to_bootloader(hdev);
+ return err;
+ }
+
+ /* The bootloader will not indicate when the device is ready. This
+ * is done by the operational firmware sending bootup notification.
+ *
+ * Booting into operational firmware should not take longer than
+ * 1 second. However if that happens, then just fail the setup
+ * since something went wrong.
+ */
+ err = btusb_boot_wait(hdev, calltime, 1000);
+ if (err == -ETIMEDOUT)
+ btintel_reset_to_bootloader(hdev);
+
+ return err;
+}
+
static int btusb_setup_intel_new(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
@@ -2811,8 +2873,6 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
struct intel_boot_params params;
u32 boot_param;
char ddcname[64];
- ktime_t calltime, delta, rettime;
- unsigned long long duration;
int err;
struct intel_debug_features features;
@@ -2847,46 +2907,9 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
if (ver.fw_variant == 0x23)
goto finish;
- calltime = ktime_get();
-
- set_bit(BTUSB_BOOTING, &data->flags);
-
- err = btintel_send_intel_reset(hdev, boot_param);
- if (err) {
- bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
- btintel_reset_to_bootloader(hdev);
+ err = btusb_intel_boot(hdev, boot_param);
+ if (err)
return err;
- }
-
- /* The bootloader will not indicate when the device is ready. This
- * is done by the operational firmware sending bootup notification.
- *
- * Booting into operational firmware should not take longer than
- * 1 second. However if that happens, then just fail the setup
- * since something went wrong.
- */
- bt_dev_info(hdev, "Waiting for device to boot");
-
- err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
- TASK_INTERRUPTIBLE,
- msecs_to_jiffies(1000));
-
- if (err == -EINTR) {
- bt_dev_err(hdev, "Device boot interrupted");
- return -EINTR;
- }
-
- if (err) {
- bt_dev_err(hdev, "Device boot timeout");
- btintel_reset_to_bootloader(hdev);
- return -ETIMEDOUT;
- }
-
- rettime = ktime_get();
- delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long) ktime_to_ns(delta) >> 10;
-
- bt_dev_info(hdev, "Device booted in %llu usecs", duration);
clear_bit(BTUSB_BOOTLOADER, &data->flags);
@@ -2949,8 +2972,6 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
struct btusb_data *data = hci_get_drvdata(hdev);
u32 boot_param;
char ddcname[64];
- ktime_t calltime, delta, rettime;
- unsigned long long duration;
int err;
struct intel_debug_features features;
struct intel_version_tlv version;
@@ -2986,46 +3007,9 @@ static int btusb_setup_intel_newgen(struct hci_dev *hdev)
if (version.img_type == 0x03)
goto finish;
- calltime = ktime_get();
-
- set_bit(BTUSB_BOOTING, &data->flags);
-
- err = btintel_send_intel_reset(hdev, boot_param);
- if (err) {
- bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
- btintel_reset_to_bootloader(hdev);
+ err = btusb_intel_boot(hdev, boot_param);
+ if (err)
return err;
- }
-
- /* The bootloader will not indicate when the device is ready. This
- * is done by the operational firmware sending bootup notification.
- *
- * Booting into operational firmware should not take longer than
- * 1 second. However if that happens, then just fail the setup
- * since something went wrong.
- */
- bt_dev_info(hdev, "Waiting for device to boot");
-
- err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
- TASK_INTERRUPTIBLE,
- msecs_to_jiffies(1000));
-
- if (err == -EINTR) {
- bt_dev_err(hdev, "Device boot interrupted");
- return -EINTR;
- }
-
- if (err) {
- bt_dev_err(hdev, "Device boot timeout");
- btintel_reset_to_bootloader(hdev);
- return -ETIMEDOUT;
- }
-
- rettime = ktime_get();
- delta = ktime_sub(rettime, calltime);
- duration = (unsigned long long)ktime_to_ns(delta) >> 10;
-
- bt_dev_info(hdev, "Device booted in %llu usecs", duration);
clear_bit(BTUSB_BOOTLOADER, &data->flags);
--
2.26.2
