Thanks Max. Patch v3 looks good to me. Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx> On Thu, Jan 21, 2021 at 5:59 PM <max.chou@xxxxxxxxxxx> wrote: > > From: Max Chou <max.chou@xxxxxxxxxxx> > > By this change, it will enable WBS supported on the specific Realtek BT > devices, such as RTL8822C and RTL8852A. > In the future, it's able to maintain what the Realtek devices support WBS > here. > > Tested-by: Hilda Wu <hildawu@xxxxxxxxxxx> > Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx> > Signed-off-by: Max Chou <max.chou@xxxxxxxxxxx> > > --- > change in v3 > -remove the null check due to unnecessary > --- > drivers/bluetooth/btrtl.c | 29 +++++++++++++++++++++++------ > 1 file changed, 23 insertions(+), 6 deletions(-) > > diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c > index 24f03a1f8d57..a21d6abc93c4 100644 > --- a/drivers/bluetooth/btrtl.c > +++ b/drivers/bluetooth/btrtl.c > @@ -38,6 +38,19 @@ > .hci_ver = (hciv), \ > .hci_bus = (bus) > > +enum btrtl_chip_id { > + CHIP_ID_8723A, /* index 0 for RTL8723A*/ > + CHIP_ID_8723B, /* index 1 for RTL8723B*/ > + CHIP_ID_8821A, /* index 2 for RTL8821A*/ > + CHIP_ID_8761A, /* index 3 for RTL8761A*/ > + CHIP_ID_8822B = 8, /* index 8 for RTL8822B */ > + CHIP_ID_8723D, /* index 9 for RTL8723D */ > + CHIP_ID_8821C, /* index 10 for RTL8821C */ > + CHIP_ID_8822C = 13, /* index 13 for RTL8822C */ > + CHIP_ID_8761B, /* index 14 for RTL8761B */ > + CHIP_ID_8852A = 18, /* index 18 for RTL8852A */ > +}; > + > struct id_table { > __u16 match_flags; > __u16 lmp_subver; > @@ -58,6 +71,7 @@ struct btrtl_device_info { > u8 *cfg_data; > int cfg_len; > bool drop_fw; > + int project_id; > }; > > static const struct id_table ic_id_table[] = { > @@ -307,8 +321,10 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, > > /* Find project_id in table */ > for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) { > - if (project_id == project_id_to_lmp_subver[i].id) > + if (project_id == project_id_to_lmp_subver[i].id) { > + btrtl_dev->project_id = project_id; > break; > + } > } > > if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) { > @@ -719,18 +735,19 @@ int btrtl_setup_realtek(struct hci_dev *hdev) > */ > set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); > > - if (!btrtl_dev->ic_info) > - goto done; > - > /* Enable central-peripheral role (able to create new connections with > * an existing connection in slave role). > */ > - switch (btrtl_dev->ic_info->lmp_subver) { > - case RTL_ROM_LMP_8822B: > + /* Enable WBS supported for the specific Realtek devices. */ > + switch (btrtl_dev->project_id) { > + case CHIP_ID_8822C: > + case CHIP_ID_8852A: > set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); > + set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); > break; > default: > rtl_dev_dbg(hdev, "Central-peripheral role not enabled."); > + rtl_dev_dbg(hdev, "WBS supported not enabled."); > break; > } > > -- > 2.17.1 >