Add support to read FW build version from debugfs node.
This info can be read from
/sys/kernel/debug/bluetooth/hci0/firmware_info
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@xxxxxxxxxxxxxx>
---
drivers/bluetooth/btqca.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btqca.h | 1 +
2 files changed, 55 insertions(+)
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index f85a55a..f6256a3 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -94,6 +94,53 @@ int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
}
EXPORT_SYMBOL_GPL(qca_read_soc_version);
+static int qca_read_fw_build_info(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ struct edl_event_hdr *edl;
+ char cmd, build_label[QCA_FW_BUILD_VER_LEN];
+ int build_lbl_len, err = 0;
+
+ bt_dev_dbg(hdev, "QCA read fw build info");
+
+ cmd = EDL_GET_BUILD_INFO_CMD;
+ skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+ &cmd, 0, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Reading QCA fw build info failed (%d)",
+ err);
+ return err;
+ }
+
+ edl = (struct edl_event_hdr *)(skb->data);
+ if (!edl) {
+ bt_dev_err(hdev, "QCA read fw build info with no header");
+ err = -EILSEQ;
+ goto out;
+ }
+
+ if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+ edl->rtype != EDL_GET_BUILD_INFO_CMD) {
+ bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+ edl->rtype);
+ err = -EIO;
+ goto out;
+ }
+
+ build_lbl_len = edl->data[0];
+ if (build_lbl_len <= QCA_FW_BUILD_VER_LEN - 1) {
+ memcpy(build_label, edl->data + 1, build_lbl_len);
+ *(build_label + build_lbl_len) = '\0';
+ }
+
+ hci_set_fw_info(hdev, "%s", build_label);
+
+out:
+ kfree_skb(skb);
+ return err;
+}
+
static int qca_send_reset(struct hci_dev *hdev)
{
struct sk_buff *skb;
@@ -524,6 +571,13 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
return err;
}
+ if (soc_type == QCA_WCN3991) {
+ /* get fw build info */
+ err = qca_read_fw_build_info(hdev);
+ if (err < 0)
+ return err;
+ }
+
bt_dev_info(hdev, "QCA setup on UART is completed");
return 0;
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index e73b8f8..b19add7 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -11,6 +11,7 @@
#define EDL_PATCH_CMD_LEN (1)
#define EDL_PATCH_VER_REQ_CMD (0x19)
#define EDL_PATCH_TLV_REQ_CMD (0x1E)
+#define EDL_GET_BUILD_INFO_CMD (0x20)
#define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
#define MAX_SIZE_PER_TLV_SEGMENT (243)
#define QCA_PRE_SHUTDOWN_CMD (0xFC08)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
