Hi Edward, > During controller initialization, an LE Set RPA Timeout command is sent > to the controller if supported. However, the value checked to determine > if the command is supported is incorrect. Page 1921 of the Bluetooth > Core Spec v5.2 shows that bit 2 of octet 35 of the Supported_Commands > field corresponds to the LE Set RPA Timeout command, but currently > bit 6 of octet 35 is checked. This patch checks the correct value > instead. > > This issue led to the error seen in the following btmon output during > initialization of an adapter (rtl8761b) and prevented initialization > from completing. > > < HCI Command: LE Set Resolvable Private Address Timeout (0x08|0x002e) plen 2 > Timeout: 900 seconds >> HCI Event: Command Complete (0x0e) plen 4 > LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2 > Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a) > = Close Index: 00:E0:4C:6B:E5:03 > > The error did not appear when running with this patch. > > Signed-off-by: Edward Vear <edwardvear@xxxxxxxxx> > --- > net/bluetooth/hci_core.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) patch has been applied to bluetooth-next tree. Regards Marcel
