https://bugzilla.kernel.org/show_bug.cgi?id=208965 --- Comment #13 from david.zakarias@xxxxxxxxx --- I tried what Julian did, but things do not work. hciconfig hci0 shows: hci0: Type: Primary Bus: USB BD Address: 80:30:49:1B:82:2C ACL MTU: 1021:6 SCO MTU: 255:12 DOWN RX bytes:2068 acl:0 sco:0 events:189 errors:0 TX bytes:32660 acl:0 sco:0 commands:189 errors:0 If I start btmon, and do sudo hciconfig hci0 up, there's a huge amount of output, and an error at the end: < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #59 [hci0] 38.597768 > HCI Event: Command Complete (0x0e) plen 4 #60 [hci0] 38.599898 LE Clear White List (0x08|0x0010) ncmd 2 Status: Success (0x00) < HCI Command: LE Set Resolvable P.. (0x08|0x002e) plen 2 #61 [hci0] 38.600001 Timeout: 900 seconds > HCI Event: Command Complete (0x0e) plen 4 #62 [hci0] 38.601954 LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2 Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a) I'm stuck, any ideas? -- You are receiving this mail because: You are the assignee for the bug.
