[PATCH] Bluetooth: btrtl: Ask 8821C to drop old firmware after shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some platforms keep USB power even when they are powered off and in S5,
this makes Realtek 8821C keep its firmware even after a cold boot, and
make 8821C never load new firmware.

So use vendor specific HCI command to ask 8821C drop its firmware after
system shutdown.

Newer firmware doesn't have this issue so we only use this trick for old
8821C firmware version.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
---
 drivers/bluetooth/btrtl.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 3a9afc905f24..2f3843fb2b95 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -55,6 +55,7 @@ struct btrtl_device_info {
 	int fw_len;
 	u8 *cfg_data;
 	int cfg_len;
+	bool drop_fw;
 };
 
 static const struct id_table ic_id_table[] = {
@@ -584,6 +585,11 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
 	hci_ver = resp->hci_ver;
 	hci_rev = le16_to_cpu(resp->hci_rev);
 	lmp_subver = le16_to_cpu(resp->lmp_subver);
+
+	if (resp->hci_ver == 0x8 && le16_to_cpu(resp->hci_rev == 0x826c) &&
+	    resp->lmp_ver == 0x8 && le16_to_cpu(resp->lmp_subver == 0xa99e))
+		btrtl_dev->drop_fw = true;
+
 	kfree_skb(skb);
 
 	btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver,
@@ -671,6 +677,9 @@ EXPORT_SYMBOL_GPL(btrtl_download_firmware);
 int btrtl_setup_realtek(struct hci_dev *hdev)
 {
 	struct btrtl_device_info *btrtl_dev;
+	struct sk_buff *skb;
+	u16 opcode;
+	u8 cmd[2];
 	int ret;
 
 	btrtl_dev = btrtl_initialize(hdev, NULL);
@@ -679,6 +688,22 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
 
 	ret = btrtl_download_firmware(hdev, btrtl_dev);
 
+	if (btrtl_dev->drop_fw) {
+		opcode = hci_opcode_pack(0x3f, 0x66);
+		cmd[0] = opcode & 0xff;
+		cmd[1] = opcode >> 8;
+
+		skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+		if (IS_ERR(skb))
+			goto out_free;
+
+		skb_put_data(skb, cmd, sizeof(cmd));
+		hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+		hdev->send(hdev, skb);
+	}
+
+out_free:
 	btrtl_free(btrtl_dev);
 
 	/* Enable controller to do both LE scan and BR/EDR inquiry
-- 
2.17.1




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux