Hi Luiz and Marcel, This is a quality of life improvement for the behavior of audio devices during system suspend. This depends on a kernel change that emits suspend/resume events: https://patchwork.kernel.org/project/bluetooth/list/?series=325771 Right now, audio devices will be disconnected as part of suspend but won't be reconnected when the system resumes without user interaction. This is annoying to some users as it causes an interruption to their normal work flow. This change reconnects audio devices that were disconnected for suspend using the following logic: * In the device disconnect callback, mark any devices with the A2DP service uuid for reconnect. The reconnect will not be queued until resume. * In the controller resume callback, queue any policy items that are marked to reconnect on resume for connection with the ResumeDelay value (default = 2s). A reconnect is queued after the controller resumes and the delay between resume and reconnect is configurable via the ResumeDelay key in the Policy settings. The 2s delay was chosen arbitrarily and I think anywhere up to 10s is probably ok. A longer delay is better to account for spurious wakeups and Wi-Fi reconnection time (avoiding any co-ex issues) at the downside of reconnection speed. Here are the tests I have done with this: - Single suspend and verified the headphones reconnect - Suspend stress test for 25 iterations and verify both Wi-Fi and Bluetooth audio reconnect on resume. (Ran with wake minimum time of 10s) - Suspend test with wake time = 1s to verify that BT reconnect isn't attempted. Ran 5 iterations with low wake time and then let it stay awake to confirm reconnect finally completed on last resume. - Suspend test with wake time between 1s - 4s. Ran with 5 iterations and verified it connected several times in the middle and finally at the end. I've tested this on a Pixelbook Go (AC-9260 controller) and HP Chromebook 14a (RTL8822CE controller) with GID6B headset. I've also tested this with the Pixel Buds 2. These earbuds actually reconnect automatically to the Chromebook (even without this policy change) and I verified that the new changes don't break the reconnection mechanism. Thanks Abhishek Changes in v3: - Refactored resume notification to use btd_adapter_driver - Renamed ReconnectAudioDelay to ResumeDelay and set default to 2 - Added A2DP_SINK_UUID to default reconnect list Changes in v2: - Refactored to use policy instead of connecting directly in adapter Abhishek Pandit-Subedi (3): mgmt: Add controller suspend and resume events monitor: Add btmon support for Suspend and Resume events policy: Reconnect audio on controller resume lib/mgmt.h | 14 +++++++++ monitor/packet.c | 55 +++++++++++++++++++++++++++++++++ plugins/policy.c | 80 +++++++++++++++++++++++++++++++++++++++--------- src/adapter.c | 36 ++++++++++++++++++++++ src/adapter.h | 2 ++ src/main.c | 1 + src/main.conf | 11 ++++++- 7 files changed, 184 insertions(+), 15 deletions(-) -- 2.28.0.402.g5ffc5be6b7-goog
