[PATCH BlueZ 1/1] Fixed issue in bluetooth-meshd which causes HCI error 0x12 when LE scanning is enabled because no random address was set. This is fixed by using the default HCI own device address option.

[Daan Pape <daan@xxxxxxxxxxxxxx>]

---
 mesh/mesh-io-generic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mesh/mesh-io-generic.c b/mesh/mesh-io-generic.c
index 67b13a1b9..65fd1c7b9 100644
--- a/mesh/mesh-io-generic.c
+++ b/mesh/mesh-io-generic.c
@@ -321,7 +321,7 @@ static void scan_disable_rsp(const void *buf, uint8_t size,
 	cmd.type = pvt->active ? 0x01 : 0x00;	/* Passive/Active scanning */
 	cmd.interval = L_CPU_TO_LE16(0x0010);	/* 10 ms */
 	cmd.window = L_CPU_TO_LE16(0x0010);	/* 10 ms */
-	cmd.own_addr_type = 0x01;		/* ADDR_TYPE_RANDOM */
+	cmd.own_addr_type = 0x00; 		/* Public Device Address */
 	cmd.filter_policy = 0x00;		/* Accept all */
 
 	bt_hci_send(pvt->hci, BT_HCI_CMD_LE_SET_SCAN_PARAMETERS,
@@ -579,7 +579,7 @@ static void set_send_adv_params(const void *buf, uint8_t size,
 	cmd.min_interval = L_CPU_TO_LE16(hci_interval);
 	cmd.max_interval = L_CPU_TO_LE16(hci_interval);
 	cmd.type = 0x03; /* ADV_NONCONN_IND */
-	cmd.own_addr_type = 0x01; /* ADDR_TYPE_RANDOM */
+	cmd.own_addr_type = 0x00; /* Public Device Address */
 	cmd.direct_addr_type = 0x00;
 	memset(cmd.direct_addr, 0, 6);
 	cmd.channel_map = 0x07;
-- 
2.20.1