https://bugzilla.kernel.org/show_bug.cgi?id=208109 Bug ID: 208109 Summary: bluetooth module blocking suspend on Toshiba X30-F Product: Drivers Version: 2.5 Kernel Version: 5.7.0 Hardware: All OS: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: Bluetooth Assignee: linux-bluetooth@xxxxxxxxxxxxxxx Reporter: grbitt@xxxxxxxxx Regression: No Tested suspend like in this article https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html Sometime when I do 'devices' or higher ('plaform', 'core', 'none') step s2ram do not do anything and return "s2ram_do: Device or resource busy". In dmesg there are this lines: [168559.764356] Bluetooth: hci0: command 0x2042 tx timeout [168559.764362] Bluetooth: hci0: No way to reset. Ignoring and continuing [168559.770445] PM: suspend exit On any new try I get the same reaction. But, if I cahnge suspend mode back to 'freezer': $ echo freezer > /sys/power/pm_test $ s2ram KMS graphics driver is in use, skipping quirks. and after that run 's2ram', system will freeze all processes successfuly. After that I can get back to 'devices', or even 'none' mode and usually sleep will work well at least couple of times. $ echo none > /sys/power/pm_test $ s2ram Also in some cases, after waking up from suspend my system hangs every halfsecond-second. Strace'ign every process, inculding init (and, by the way, killing all of them excluding init and login/bash) didn't worked out well, I'v still got no clue. There is nothing interesting or somehow related to hangs activity or polling or whatever. So, here is dmesg before suspend ====================== BEFORE BUGGY SUSPEND ====================== [191829.790397] PM: suspend entry (s2idle) [191829.807975] Filesystems sync: 0.017 seconds [191829.808803] Freezing user space processes ... (elapsed 0.002 seconds) done. [191829.811519] OOM killer disabled. [191829.811521] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [191829.813097] printk: Suspending console(s) (use no_console_suspend to debug) [191829.818779] wlan0: deauthenticating from b0:e2:35:ca:1b:5b by local choice (Reason: 3=DEAUTH_LEAVING) ================================================================== And after suspend which lead to hangs: ====================== AFTER BUGGGY SUSPEND ====================== [198262.334096] ACPI: EC: interrupt unblocked [198265.608349] OOM killer enabled. [198265.608351] Restarting tasks ... [198265.608452] pci_bus 0000:05: Allocating resources [198265.608480] pci_bus 0000:39: Allocating resources [198265.615005] done. [198265.621481] PM: suspend exit [198266.125942] usb 1-10: new full-speed USB device number 12 using xhci_hcd [198266.254840] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02 [198266.254845] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [198266.256821] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015 [198266.257838] Bluetooth: hci0: Device revision is 2 [198266.257842] Bluetooth: hci0: Secure boot is enabled [198266.257844] Bluetooth: hci0: OTP lock is enabled [198266.257845] Bluetooth: hci0: API lock is enabled [198266.257846] Bluetooth: hci0: Debug lock is disabled [198266.257848] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [198266.259721] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi [198267.636489] Bluetooth: hci0: Waiting for firmware download to complete [198267.636793] Bluetooth: hci0: Firmware loaded in 1347969 usecs [198267.636949] Bluetooth: hci0: Waiting for device to boot [198267.649795] Bluetooth: hci0: Device booted in 12590 usecs [198267.650018] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc [198267.652809] Bluetooth: hci0: Applying Intel DDC parameters completed [198267.654810] Bluetooth: hci0: Firmware revision 0.1 build 26 week 11 2020 ============================================================================= But I can solve hangs problem by changing debug suspend mode and running 'devices' suspend. After that system goes to suspend fine, exit suspend just fine and works after that just fine. Here is example of dmesg with correct suspend and wakeup: [204009.881166] PM: suspend entry (s2idle) [204009.887627] Filesystems sync: 0.006 seconds [204009.993112] Freezing user space processes ... (elapsed 0.002 seconds) done. [204009.996092] OOM killer disabled. [204009.996093] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [204009.997225] printk: Suspending console(s) (use no_console_suspend to debug) [204009.997714] wlan0: deauthenticating from 4c:5e:0c:5c:22:6d by local choice (Reason: 3=DEAUTH_LEAVING) [204010.442910] PM: suspend debug: Waiting for 5 second(s). [204015.465110] nvme nvme0: Shutdown timeout set to 8 seconds [204015.473568] nvme nvme0: 8/0/0 default/read/poll queues [204015.900672] OOM killer enabled. [204015.900673] Restarting tasks ... done. [204015.927051] PM: suspend exit [204018.264651] atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly. And of course usb-devices for bluetooth module: T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 12 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0aaa Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Bug tested with 5.7.0 with PM debug options. I'm using MX 19.2 patito feo. Any logs or testing needed? -- You are receiving this mail because: You are the assignee for the bug.
