Re: avrcp: Cannot connect Sennheiser Momentum True Wireless 2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-05-06 19:56, Andrey Semashev wrote:
Hello!

I have a problem connecting Sennheiser Momentum True Wireless 2 headphones over Bluetooth. The headphones say "Connected" and then reboot immediately after. After reboot the headphones say "Power on" and try connecting again, and fail the same way, and so on.
 From the Bluetooth packet dump it looks like the problem happens after 
bluetoothd sends AVRCP ListPlayerApplicationSettingAttributes message to 
the headphones. The headphones send Not Implemented response and then 
reboot. Both in the request and the response Wireshark shows warnings 
about encoding issues.
I'm attaching a packet dump captured from one of the connection 
attempts. The ListPlayerApplicationSettingAttributes message is in 
packet 262 and the response is in packet 264.
This is on Kubuntu 20.04. I tried bluez 5.53 from Kubuntu and revision 
3146b7a0785758be2d4e894d44e99d29c0db983e from git master - the behavior 
is the same.
I've also verified that the headphones do work on Windows 10. On that 
system, ListPlayerApplicationSettingAttributes is not present in the 
packet exchange. I can provide the packet dump from Windows, if needed.
I hope this is the right place to report problems like this one. If not 
- sorry, and please point me to the right place.
Thank you.
I'll add that I can connect the headphones if I disable AVRCP by adding 
--noplugin=avrcp to bluetoothd command line.


[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux