This change adds the definition for the load default parameter command.
In particular, this command is used to load default parameters for
various operations in the kernel. This mechanism is also expandable to
future knobs that may be necessary.
This will allow bluetoothd to load parameters from a conf file that may
be customized for the specific requirements of each platforms.
---
doc/mgmt-api.txt | 59 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
index 39f23c456..71d528706 100644
--- a/doc/mgmt-api.txt
+++ b/doc/mgmt-api.txt
@@ -3137,6 +3137,65 @@ Read Security Information Command
Possible errors: Invalid Parameters
Invalid Index
+Load Default Parameter Command
+=============================
+
+ Command Code: 0x0049
+ Controller Index: <controller id>
+ Command Parameters: Parameter_Count (2 Octets)
+ Parameter1 {
+ Parameter_Type (2 Octet)
+ Value_Length (1 Octet)
+ Value (0-255 Octets)
+ }
+ Parameter2 { }
+ ...
+ Return Parameters:
+
+ This command is used to feed the kernel a list of default parameters.
+
+ Currently defined Parameter_Type values are:
+
+ 0x0000 BR/EDR Page Scan Type
+ 0x0001 BR/EDR Page Scan Interval
+ 0x0002 BR/EDR Page Scan Window
+ 0x0003 BR/EDR Inquiry Scan Type
+ 0x0004 BR/EDR Inquiry Scan Interval
+ 0x0005 BR/EDR Inquiry Scan Window
+ 0x0006 BR/EDR Link Supervision Timeout
+ 0x0007 BR/EDR Page Timeout
+ 0x0008 BR/EDR Min Sniff Interval
+ 0x0009 BR/EDR Max Sniff Interval
+ 0x0080 LE Advertisement Min Interval
+ 0x0081 LE Advertisement Max Interval
+ 0x0082 LE Multi Advertisement Rotation Interval
+ 0x0083 LE Scanning Interval for auto connect
+ 0x0084 LE Scanning Window for auto connect
+ 0x0085 LE Scanning Interval for HID only
+ 0x0086 LE Scanning Window for HID only
+ 0x0087 LE Scanning Interval for wake scenarios
+ 0x0088 LE Scanning Window for wake scenarios
+ 0x0089 LE Scanning Interval for discovery
+ 0x008a LE Scanning Window for discovery
+ 0x008b LE Scanning Interval for adv monitoring
+ 0x008c LE Scanning Window for adv monitoring
+ 0x008d LE Scanning Interval for connect
+ 0x008e LE Scanning Window for connect
+ 0x008f LE Min Connection Interval
+ 0x0090 LE Max Connection Interval
+ 0x0091 LE Connection Connection Latency
+ 0x0092 LE Connection Supervision Timeout
+
+ This command can be used any time, but will not take effect until the
+ next activity requiring the parameters. In the case the parameters are
+ used during initialization of the adapter, it is expected that the
+ parameters be set before the adapter is powered.
+
+ This command generates a Command Complete event on success or
+ a Command Status event on failure.
+
+ Possible errors: Invalid Parameters
+ Invalid Index
Command Complete Event
======================
--
2.26.2.526.g744177e7f7-goog
