Hi Pali, Can you send a proper patch adding these, have you changed the code already to use channel 7? On Tue, Apr 14, 2020 at 12:53 PM Pali Rohár <pali@xxxxxxxxxx> wrote: > > Hello Luiz! > > I have there another simple change for updating documentation: > > diff --git a/doc/profile-api.txt b/doc/profile-api.txt > index ec18034a6..183c6c11a 100644 > --- a/doc/profile-api.txt > +++ b/doc/profile-api.txt > @@ -16,10 +16,33 @@ Object path /org/bluez > If an application disconnects from the bus all > its registered profiles will be removed. > > + Some predefined services: > + > + HFP AG UUID: 0000111f-0000-1000-8000-00805f9b34fb > + > + Default profile Version is 1.7, profile Features > + is 0b001001 and RFCOMM channel is 13. > + Authentication is required. > + > HFP HS UUID: 0000111e-0000-1000-8000-00805f9b34fb > > - Default RFCOMM channel is 6. And this requires > - authentication. > + Default profile Version is 1.7, profile Features > + is 0b000000 and RFCOMM channel is 7. > + Authentication is required. > + > + HSP AG UUID: 00001112-0000-1000-8000-00805f9b34fb > + > + Default profile Version is 1.2, RFCOMM channel > + is 12 and Authentication is required. Does not > + support any Features, option is ignored. > + > + HSP HS UUID: 00001108-0000-1000-8000-00805f9b34fb > + > + Default profile Version is 1.2, profile Features > + is 0b0 and RFCOMM channel is 6. Authentication > + is required. Features is one bit value, specify > + capability of Remote Audio Volume Control > + (by default turned off). > > Available options: > > > > There is a mistake in documentation that default rfcomm channel for HFP > HS profile is 6. But in reality default rfcomm channel for HFP is 7. > Channel 6 is default for HSP HS profile as can be seen in src/profile.c. -- Luiz Augusto von Dentz
