On Fri, Apr 10, 2020 at 12:47 AM Marcel Holtmann <marcel@xxxxxxxxxxxx> wrote:
>
> Hi Miao-chen,
>
> > This patch proposes an Advertisement Monitoring API for an application to
> > register a job of monitoring ADV reports with content filter and RSSI
> > thresholds.
> >
> > Signed-off-by: Miao-chen Chou <mcchou@xxxxxxxxxxxx>
> > ---
> >
> > doc/advertisement-monitoring-api.txt | 163 +++++++++++++++++++++++++++
> > 1 file changed, 163 insertions(+)
> > create mode 100644 doc/advertisement-monitoring-api.txt
> >
> > diff --git a/doc/advertisement-monitoring-api.txt b/doc/advertisement-monitoring-api.txt
> > new file mode 100644
> > index 000000000..070487481
> > --- /dev/null
> > +++ b/doc/advertisement-monitoring-api.txt
> > @@ -0,0 +1,163 @@
> > +BlueZ D-Bus Advertisement Monitoring API Description
> > +****************************************************
>
> I would name it “Advertisement Monitor”
>
> > +
> > +This API allows an application to specify a job of monitoring advertisements
> > +by providing a filter with filtering conditions, thresholds of RSSI and timers
> > +of RSSI thresholds.
> > +
> > +Once an application registers a monitoring job, it can expect to get notified
> > +on its targeted advertisements no matter if there is an ongoing discovery
> > +session (a discovery session is started/stopped with methods in
> > +org.bluez.Adapter1 interface).
>
> Just for readability two empty lines here. See the other docs for an example. They should be mostly consistent in their style.
>
> > +
> > +Advertisement Filter hierarchy
> > +==============================
> > +Service org.bluez
> > +Interface org.bluez.AdvertisementFilter1
> > +Object path freely definable
> > +
> > +Methods void Release() [noreply]
> > +
> > + This gets called as a signal for a client to perform
> > + clean-up when BlueZ has invalidated the filter.
> > +
> > + void DeviceInRange(object device, int16 RSSI, int16 TX_power,
> > + array{dict} ADV_data,
> > + array{uint8} ADV_raw_data)
>
> Actually looking at what the device object already gives you for free, I think you just need this:
>
> void DeviceInRange(object device)
>
> You will have the RSSI and TxPower fields and also the advertising data considered for consumption by the application. If you really really need the raw advertising report data, then we might include them as extra property type, but only if asked for. With advertising extensions these can get rather large.
>
> Just to explain this reasoning to only use the object device here. Don’t see it as a full object, since it is just a reference and more precise a filter to find your object in the list of all objects. So an application can ignore everything else, but just has to filter the device object path out from all objects to find the information of the device it was looking for.
My concern is that adopting DeviceInRange(object device) will require
an application to issue following D-Bus calls to read properties
including AdvertisingData, RSSI, Tx power(it may be included in
AdvertisingData) and perhaps a new property RawAdvertisingData. Given
these calls reach bluetoothd, the values of these properties may have
changed, so the reading no longer presents the exact values associated
with the DeviceInRange() event. How do we get around this without
providing the actual values along with DeviceInRange?
>
> > +
> > + If RSSIThreshholdsAndTimers exists, this gets called to
> > + notify the client on finding the targeted device when
> > + RSSI(s) of the matched advertisement(s) exceed the
> > + HighRSSIThreshold at least HighRSSIThresholdTimer.
> > + If RSSIThreshholdsAndTimers does not exist, this does
> > + not get called.
> > +
> > + Parameters:
> > + device The device object path associated with
> > + the advertisement.
> > + RSSI The RSSI comes along with the
> > + advertisement.
> > + TX_power The TX power AD data provided in the
> > + advertisement. 127 indicates the absence
> > + of TX power AD data.
> > + ADV_data The signature of adv_data is a{yv} where
> > + “y” is the AD data type value and “v” is
> > + the value of the AD data where the type
> > + may vary depending on the AD data. For
> > + instance, if "y" is 0x16, "v" would be
> > + an array of bytes.
> > + ADV_raw_data The raw bytes of AD data from the
> > + advertisement packet.
> > +
> > + void AdvertisementReceived(object device, int16 RSSI,
> > + int16 TX_power, array{dict} ADV_data,
> > + array{uint8} ADV_raw_data)
> > +
> > + If RSSIThreshholdsAndTimers exists, this gets called
> > + every time except for the first time when receiving the
> > + matched advertisement(s) exceeding the
> > + HighRSSIThreshold. Once DeviceOutOfRange() gets called,
> > + this no longer gets called until DeviceInRange() gets
> > + called again.
> > + If RSSIThreshholdsAndTimers does not exist, this gets
> > + called whenever receiving the matched advertisements.
> > +
> > + Parameters:
> > + device The device object path associated with
> > + the advertisement.
> > + RSSI The RSSI comes along with the
> > + advertisement.
> > + TX_power The TX power AD data provided in the
> > + advertisement. 127 indicates the absence
> > + of TX power AD data.
> > + ADV_data The signature of adv_data is a{yv} where
> > + “y” is the AD data type value and “v” is
> > + the value of the AD data where the type
> > + may vary depending on the AD data. For
> > + instance, if "y" is 0x16, "v" would be
> > + an array of bytes.
> > + ADV_raw_data The raw bytes of AD data from the
> > + advertisement packet.
>
> This differentiation rubs me a bit the wrong way. I think it makes things a bit too complicated.
>
> In case you don’t specify any RSSI thresholds, I would still like to use DeviceInRange and DeviceOutOfRange notifications. We have always used timeouts to indicate that devices are no longer valid and removed them. They needed to be found again. And even without RSSI this will be the case since you have device moving around. So it would be good to indicate that a device is gone.
>
> Now the question is what we do for updates of a device that is currently in range and has been found. I think we don’t have to do anything. Since a client that cares about that device, can just monitor the object properties that we will keep updating as we find the device again. So if the RSSI, TxPower or even the advertising data changes, the client will be informed by a PropertiesChanged signal.
In the case where RSSIs thresholds are not enforced, my original
thought was that DeviceInRange and DeviceOutOfRange do not make lots
of sense, since the terms "InRange" and "OutOfRange" implies RSSI
checks. Also DeviceOutOfRange won't be called in this case, since no
timer was given. Unless you see this differently?
In the case where RSSIs thresholds are provided, using only
DeviceInRange and DeviceOutOfRange makes sense.
>
> > +
> > + void DeviceOutOfRange(device object)
> > +
> > + If RSSIThreshholdsAndTimers exists, this gets called
> > + when RSSIs of the matched advertisements are lower than
> > + LowRSSIThreshold for at least LowRSSIThresholdTimer to
> > + notify the client on losing the targeted device.
> > + If RSSIThreshholdsAndTimers does not exist, this won’t
> > + get called.
>
> We could consider doing a pair of DeviceFound + DeviceLost.
>
> And of course we have to split the callback handling with filter properties. When you read the full method name it needs to make sense. So org.bluez.AdvertisementFilter1.DeviceInRange is not really logical.
>
> I would have something like org.bluez.AdvertismentMonitor.DeviceFound for example.
>
DeviceFound() and DeviceLost() sound good to me. Are you suggesting
having two properties, one for HighRSSIThreshold and
HighRSSIThresholdTimer and one for LowRSSIThreshold and
LowRSSIThresholdTimer, so that DeviceFound() is called only if
HighRSSIThresholdAndTimer exists, and DeviceLost() is called only if
LowRSSIThresholdAndTimer exists?
> > +
> > +Properties uint8 FilterType [read-only]
> > +
> > + This can be the following values. More will be added.
> > + 0x01 - Patterns with OR logic relation
> > +
> > + (Int16, Uint16, Int16, Uint16) RSSIThreshholdsAndTimers [read-only, optional]
> > +
> > + The contains HighRSSIThreshold, HighRSSIThresholdTimer,
> > + LowRSSIThreshold, LowRSSIThresholdTimer in order. The
> > + unit of HighRSSIThreshold and LowRSSIThreshold is dBm.
> > + The unit of HighRSSIThresholdTimer and
> > + LowRSSIThresholdTimer is second.
> > +
> > + A device is considered in-range when the RSSIs of the
> > + received advertisement(s) during HighRSSIThresholdTimer
> > + seconds exceed HighRSSIThreshold. Likewise, a device is
> > + considered out-of-range when the RSSIs of the received
> > + advertisement(s) during LowRSSIThresholdTimer do not
> > + reach LowRSSIThreshold.
> > +
> > + array{(uint8, uint8, string)} Patterns [read-only, optional]
> > +
> > + If “PatternsWithORLogicRelation” is supported, this must
> > + exist and has at least one entry in the array.
> > +
> > + The structure of a pattern contains the following.
> > + uint8 start_position
> > + The index in an AD data field where the search
> > + should start. The beginning of an AD data field
> > + is index 0.
> > + uint8 AD_data_type
> > + See https://www.bluetooth.com/specifications/
> > + assigned-numbers/generic-access-profile/ for
> > + the possible allowed value.
> > + string content_of_pattern
> > + This is the value of the pattern.
>
> This part I would provide as dict to the RegisterMonitor method (see below).
>
> > +
> > +Advertisement Monitor hierarchy
> > +===============================
> > +Service org.bluez
> > +Interface org.bluez.AdvertisementMonitor1
> > +Object path /org/bluez/{hci0,hci1,...}
>
> If we follow our current style then it would be org.bluez.AdvertismentMonitorManager.
>
> While writing this email so far, I am kinda tempted to call it org.bluez.DeviceMonitorManager and org.bluez.DeviceMonitor. It is just a temptation at this point and it is good to sleep about it for a bit.
>
> > +
> > +Methods void RegisterApplication(object filter)
> > +
> > + This registers a job of monitoring advertisement in a
> > + power efficient way. Based on the content of the filter
> > + upon registration, the filter object can expect to
> > + receive the matched advertisements via DeviceInRange()
> > + and AdvertisementReceived().
>
> RegisterMonitor(object monitor, dict thresholds, dict filter)
>
> Having the thresholds and the filters as dicts here make it clear that you have to destroy the monitor and create a new one of you want to change them. I think that is acceptable and in the end an easy task, since you still can reuse the object monitor that you have already set up. It also make the code for bluetoothd simpler since it doesn’t have to track life changes to the filters and act on them.
>
This was close to what I proposed earlier where the thresholds and the
filtering conditions are provided upon function calls, and Luiz
suggested adopting advertising API's way. Given that we may want to
provide what Android provides at some point, having a dict to host
filtering conditions may not be sufficient. If we'd like to have AND
logical relation applied among filtering conditions within a filter,
we basically need to change the signature here. For instance, an
application would like to look for advertisements matching service
UUID 0x1234 AND 0x5678 in Manufacturer data. Having filtering
conditions defined as properties make this possible by adding another
property later without changing the function signature.
I'd like to raise the same concern that I had in previous meetings.
Given that we plan to have SW filtering first and then offload the
filtering to the BT controller, there may be logical relations
infeasible by HCI extensions. Should we influence this API by the
capabilities of HCI extensions? I guess the answer is not, and that
means bluetoothd needs to be sophisticated enough to determined the
filtering conditions send to kernel for the first tier filtering and
performs the second tier filtering itself.
> > +
> > + void UnregisterApplication(filter object)
> > +
> > + This unregisters the job of monitoring advertisement.
> > + The filter object can expect to be called on Release()
> > + once the removal is done.
> > +
> > + void UnregisterAllApplications()
> > +
> > + This unregisters all jobs of monitoring advertisement.
> > + All filter objects can expect to be called on Release()
> > + once the removals are done.
>
> I would rather not have an UnregisterAll. We didn’t need it until now and the object monitor was always bound to the lifetime of the application.
Ack.
>
> > +
> > +Properties array{string} SupportedFilteringFeatures [read-only]
> > +
> > + This reflects the supported features of advertisement
> > + monitoring. An application should check this before
> > + instantiate an object of org.bluez.AdvertisementFilter1.
> > +
> > + Here are the potential features. More will be added.
> > + "SoftwareBasedFiltering"
> > + "PatternsWithORLogicRelation"
> > + “RSSIMonitoring”
>
> So all our string values are lower-case and if needed we use - to separate words or logical details.
>
> I think exposing a good interface for selecting the filter patterns will take a bit. I would like to focus on getting the surrounding framework figured out first.
>
> Before finalizing an API, my test was always to write a simple client and check if it meets the requirement for being simple enough. If it becomes cumbersome for the client, then we need to consider putting some of the more complicated parts into bluetoothd.
>
> Let me try to give an example. If the majority of the clients just want to find a device with UUID 0xFE23, then we should have a special casing for that.
>
> RegisterMonitor(monitor, dict{MatchUUID=0xFE23}).
>
> Done. That they have to differentiate between one vendors way of doing this compared to another on how to provide the information should be up to bluetoothd to figure it out (and yes, I know it is not as simple when the AD type is a list).
Again, this was close to what I proposed earlier where the thresholds
and the filtering conditions are provided upon function call. Please
see my above comments on why I think this may not be sufficient.
Thanks,
Miao
