From: Archie Pusaka <apusaka@xxxxxxxxxxxx>
The BT spec doesn't make it explicit of what should happen when
receiving a bad signed att request packet.
According to BT core spec Vol 3, Part C, Sec 10.4.2:
A device receiving signed data shall authenticate it by performing
the Signing Algorithm. If the MAC computed by the Signing Algorithm
does not match the received MAC, the verification fails and the Host
shall ignore the received Data PDU.
According to BT core spec Vol 3, Part F, Sec 3.3
If a server receives a request that it does not support, then the
server shall respond with the ATT_ERROR_RSP PDU with the error code
Request Not Supported.
This patch does this two things:
(1) Removing the signed bit to the existing tests so they are not
in a conflicting state within the bluetooth spec, while still
keeping the original intent of the test.
(2) Add another test that purposely fall within this grey area
with some comments.
---
Changes in v4:
- Fixing test-gatt.c
Changes in v3: None
Changes in v2: None
unit/test-gatt.c | 32 +++++++++++++++++++++++++++-----
1 file changed, 27 insertions(+), 5 deletions(-)
diff --git a/unit/test-gatt.c b/unit/test-gatt.c
index 36dd2847c..139a6fc72 100644
--- a/unit/test-gatt.c
+++ b/unit/test-gatt.c
@@ -4473,16 +4473,38 @@ int main(int argc, char *argv[])
raw_pdu(0x18, 0x01),
raw_pdu(0x01, 0x18, 0x25, 0x00, 0x06));
- define_test_server("/robustness/unkown-request",
+ define_test_server("/robustness/unknown-request",
test_server, service_db_1, NULL,
raw_pdu(0x03, 0x00, 0x02),
- raw_pdu(0xbf, 0x00),
- raw_pdu(0x01, 0xbf, 0x00, 0x00, 0x06));
+ raw_pdu(0x3f, 0x00),
+ raw_pdu(0x01, 0x3f, 0x00, 0x00, 0x06));
+
+ define_test_server("/robustness/unknown-command",
+ test_server, service_db_1, NULL,
+ raw_pdu(0x03, 0x00, 0x02),
+ raw_pdu(0x7f, 0x00),
+ raw_pdu());
- define_test_server("/robustness/unkown-command",
+ /*
+ * According to BT core spec Vol 3, Part C, Sec 10.4.2:
+ * A device receiving signed data shall authenticate it by performing
+ * the Signing Algorithm. If the MAC computed by the Signing Algorithm
+ * does not match the received MAC, the verification fails and the Host
+ * shall ignore the received Data PDU.
+ *
+ * However, according to BT core spec Vol 3, Part F, Sec 3.3
+ * If a server receives a request that it does not support, then the
+ * server shall respond with the ATT_ERROR_RSP PDU with the error code
+ * Request Not Supported.
+ *
+ * Since there is no explicit instruction on what should be done in
+ * case the server receives a bad signed unsupported request, here
+ * we just ignore the received PDU.
+ */
+ define_test_server("/robustness/signed-unknown-request",
test_server, service_db_1, NULL,
raw_pdu(0x03, 0x00, 0x02),
- raw_pdu(0xff, 0x00),
+ raw_pdu(0xbf, 0x00),
raw_pdu());
return tester_run();
--
2.26.0.292.g33ef6b2f38-goog
