Hi Miao-chen,
> This adds a bit mask of driver_info for Microsoft vendor extension and
> indicates the support for Intel 9160/9260. This was verified with Intel
> ThunderPeak BT controller where msft_opcode is 0xFC1E.
>
> Signed-off-by: Marcel Holtmann <marcel@xxxxxxxxxxxx>
> Signed-off-by: Miao-chen Chou <mcchou@xxxxxxxxxxxx>
> ---
>
> Changes in v5:
> - Extract the changes on btusb as a different commit.
>
> Changes in v4:
> - Introduce CONFIG_BT_MSFTEXT as a starting point of providing a
> framework to use Microsoft extension
> - Create include/net/bluetooth/msft.h and net/bluetooth/msft.c to
> facilitate functions of Microsoft extension.
>
> Changes in v3:
> - Create net/bluetooth/msft.c with struct msft_vnd_ext defined internally
> and change the hdev->msft_ext field to void*.
> - Define and expose msft_vnd_ext_set_opcode() for btusb use.
> - Init hdev->msft_ext in hci_alloc_dev() and deinit it in hci_free_dev().
>
> Changes in v2:
> - Define struct msft_vnd_ext and add a field of this type to struct
> hci_dev to facilitate the support of Microsoft vendor extension.
>
> drivers/bluetooth/btusb.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 3bdec42c96123..f73ad18c04559 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -20,6 +20,7 @@
>
> #include <net/bluetooth/bluetooth.h>
> #include <net/bluetooth/hci_core.h>
> +#include <net/bluetooth/msft.h>
>
> #include "btintel.h"
> #include "btbcm.h"
> @@ -58,6 +59,7 @@ static struct usb_driver btusb_driver;
> #define BTUSB_CW6622 0x100000
> #define BTUSB_MEDIATEK 0x200000
> #define BTUSB_WIDEBAND_SPEECH 0x400000
> +#define BTUSB_MSFT_VND_EXT 0x800000
>
> static const struct usb_device_id btusb_table[] = {
> /* Generic Bluetooth USB device */
> @@ -335,7 +337,8 @@ static const struct usb_device_id blacklist_table[] = {
>
> /* Intel Bluetooth devices */
> { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_NEW |
> - BTUSB_WIDEBAND_SPEECH },
> + BTUSB_WIDEBAND_SPEECH |
> + BTUSB_MSFT_VND_EXT },
> { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_NEW |
> BTUSB_WIDEBAND_SPEECH },
> { USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW |
> @@ -3800,6 +3803,12 @@ static int btusb_probe(struct usb_interface *intf,
> set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
> set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
> set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
> +
> + /* All Intel controllers that support the Microsoft
> + * vendor extension are using 0xFC1E for VsMsftOpCode.
> + */
> + if (id->driver_info & BTUSB_MSFT_VND_EXT)
> + msft_set_opcode(hdev, 0xFC1E);
I decided to actually set the MSFT extension support in the btusb_setup_intel_new handler based on our firmware version information. I think that this will be better than USB products IDs. We can revisit this later, but for now, this should be enough.
Johan also applied the whole series and you should base your next steps on bluetooth-next.
Regards
Marcel
