Perform the following steps to verify advertising intervals.
Open a terminal on the DUT, and execute
$ btmon
Open another terminal on the DUT, and register an advertisement.
$ ./example-advertisement
Observe that the default intervals are 1280 msec in btmon log.
< HCI Command: LE Set Advertising Parameters (0x08|0x0006) plen 15
Min advertising interval: 1280.000 msec (0x0800)
Max advertising interval: 1280.000 msec (0x0800)
Press ctrl-c to terminate the advertisement.
Set new intervals to 200 ms.
$ ./example-advertising-intervals 200 200
It would show the following line in btmon log.
= bluetoothd: Set Advertising Intervals: 0x0140, 0x0140
Register an advertisement again.
$ ./example-advertisement
Observe that the new intervals bcome 200 msec in btmon log.
< HCI Command: LE Set Advertising Parameters (0x08|0x0006) plen 15
Min advertising interval: 200.000 msec (0x0140)
Max advertising interval: 200.000 msec (0x0140)
Press ctrl-c to terminate the advertisement.
Signed-off-by: Howard Chung <howardchung@xxxxxxxxxx>
---
test/example-advertising-intervals | 48 ++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 test/example-advertising-intervals
diff --git a/test/example-advertising-intervals b/test/example-advertising-intervals
new file mode 100644
index 000000000..8afc7225e
--- /dev/null
+++ b/test/example-advertising-intervals
@@ -0,0 +1,48 @@
+#!/usr/bin/python
+
+"""A simple script to set advertising intervals through the dbus method.
+
+Usage:
+ $ ./example_advertising_intervals.py min_interval_ms max_interval_ms
+
+ Example:
+ # Set both min and max advertising intervals to 200 ms.
+ $ ./exampel_advertising_intervals.py 200 200
+"""
+
+import dbus
+import time
+import subprocess
+import sys
+
+argv = sys.argv
+argc = len(argv)
+prog = argv[0]
+if argc == 3:
+ min_interval_ms = int(argv[1])
+ max_interval_ms = int(argv[2])
+ print 'Set advertising intervals: [%d, %d]' % (min_interval_ms,
+ max_interval_ms)
+else:
+ print 'Usage: python %s min_interval_ms max_interval_ms' % prog
+ print ' python %s 200 200' % prog
+ sys.exit(1)
+
+
+# Set advertising intervals.
+bus = dbus.SystemBus()
+adapter = bus.get_object('org.bluez', '/org/bluez/hci0')
+adapter.SetAdvertisingIntervals(
+ min_interval_ms, max_interval_ms,
+ dbus_interface='org.bluez.LEAdvertisingManager1')
+
+
+# Wait a little while for dbus method to complete.
+time.sleep(0.2)
+
+
+# Check the current settings using btmgmt.
+btmgmt_cmd = 'btmgmt info'
+for line in subprocess.check_output(btmgmt_cmd.split()).splitlines():
+ if 'current settings' in line:
+ print line.strip()
--
2.26.0.rc2.310.g2932bb562d-goog
