Hi Marcel,
On Wed, Mar 25, 2020 at 2:15 PM Marcel Holtmann <marcel@xxxxxxxxxxxx> wrote:
>
> Hi Luiz,
>
> > This adds BT_MODE socket option which can be used to set L2CAP modes,
> > including modes only supported over LE which were not supported using
> > the L2CAP_OPTIONS.
> >
> > Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
> > ---
> > include/net/bluetooth/bluetooth.h | 8 ++
> > net/bluetooth/l2cap_sock.c | 120 +++++++++++++++++++++++++++++-
> > 2 files changed, 127 insertions(+), 1 deletion(-)
> >
> > diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> > index 1576353a2773..3fa7b1e3c5d9 100644
> > --- a/include/net/bluetooth/bluetooth.h
> > +++ b/include/net/bluetooth/bluetooth.h
> > @@ -139,6 +139,14 @@ struct bt_voice {
> > #define BT_PHY_LE_CODED_TX 0x00002000
> > #define BT_PHY_LE_CODED_RX 0x00004000
> >
> > +#define BT_MODE 15
> > +
> > +#define BT_MODE_BASIC 0x00
> > +#define BT_MODE_ERTM 0x01
> > +#define BT_MODE_STREAMING 0x02
> > +#define BT_MODE_LE_FLOWCTL 0x03
> > +#define BT_MODE_EXT_FLOWCTL 0x04
> > +
> > __printf(1, 2)
> > void bt_info(const char *fmt, ...);
> > __printf(1, 2)
> > diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
> > index 117ba20ea194..07f8d60953f2 100644
> > --- a/net/bluetooth/l2cap_sock.c
> > +++ b/net/bluetooth/l2cap_sock.c
> > @@ -395,6 +395,24 @@ static int l2cap_sock_getname(struct socket *sock, struct sockaddr *addr,
> > return sizeof(struct sockaddr_l2);
> > }
> >
> > +static int l2cap_get_mode(struct l2cap_chan *chan)
> > +{
> > + switch (chan->mode) {
> > + case L2CAP_MODE_BASIC:
> > + return BT_MODE_BASIC;
> > + case L2CAP_MODE_ERTM:
> > + return BT_MODE_ERTM;
> > + case L2CAP_MODE_STREAMING:
> > + return BT_MODE_STREAMING;
> > + case L2CAP_MODE_LE_FLOWCTL:
> > + return BT_MODE_LE_FLOWCTL;
> > + case L2CAP_MODE_EXT_FLOWCTL:
> > + return BT_MODE_EXT_FLOWCTL;
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
> > char __user *optval, int __user *optlen)
> > {
> > @@ -424,6 +442,13 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
> > break;
> > }
> >
> > + /* L2CAP_MODE_LE_FLOWCTL and L2CAP_MODE_EXT_FLOWCTL are not
> > + * supported by L2CAP_OPTIONS.
> > + */
> > + if (chan->mode == L2CAP_MODE_LE_FLOWCTL ||
> > + chan->mode == L2CAP_MODE_EXT_FLOWCTL)
>
> this is the wrong kernel indentation.
Fixed
> > + return -EINVAL;
> > +
> > memset(&opts, 0, sizeof(opts));
> > opts.imtu = chan->imtu;
> > opts.omtu = chan->omtu;
> > @@ -508,7 +533,7 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
> > struct bt_security sec;
> > struct bt_power pwr;
> > u32 phys;
> > - int len, err = 0;
> > + int len, mode, err = 0;
> >
> > BT_DBG("sk %p", sk);
> >
> > @@ -624,6 +649,27 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
> > err = -EFAULT;
> > break;
> >
> > + case BT_MODE:
> > + if (!enable_ecred) {
> > + err = -ENOPROTOOPT;
> > + break;
> > + }
> > +
> > + if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
> > + err = -EINVAL;
> > + break;
> > + }
> > +
> > + mode = l2cap_get_mode(chan);
> > + if (mode < 0) {
> > + err = mode;
> > + break;
> > + }
> > +
> > + if (put_user(mode, (u8 __user *) optval))
> > + err = -EFAULT;
> > + break;
> > +
> > default:
> > err = -ENOPROTOOPT;
> > break;
> > @@ -763,6 +809,45 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
> > return err;
> > }
> >
> > +static int l2cap_set_mode(struct l2cap_chan *chan, u8 mode)
> > +{
> > + switch (mode) {
> > + case BT_MODE_BASIC:
> > + if (bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_BASIC;
> > + clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
> > + break;
> > + case BT_MODE_ERTM:
> > + if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_ERTM;
> > + break;
> > + case BT_MODE_STREAMING:
> > + if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_STREAMING;
> > + break;
> > + case BT_MODE_LE_FLOWCTL:
> > + if (!bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_LE_FLOWCTL;
> > + break;
> > + case BT_MODE_EXT_FLOWCTL:
> > + /* TODO: Add support for ECRED PDUs to BR/EDR */
> > + if (!bdaddr_type_is_le(chan->src_type))
> > + return -EINVAL;
> > + mode = L2CAP_MODE_EXT_FLOWCTL;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + chan->mode = mode;
> > +
> > + return 0;
> > +}
> > +
> > static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
> > char __user *optval, unsigned int optlen)
> > {
> > @@ -968,6 +1053,39 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
> >
> > break;
> >
> > + case BT_MODE:
> > + if (!enable_ecred) {
> > + err = -ENOPROTOOPT;
> > + break;
> > + }
> > +
> > + BT_DBG("sk->sk_state %u", sk->sk_state);
> > +
> > + if (sk->sk_state != BT_BOUND) {
> > + err = -EINVAL;
> > + break;
> > + }
> > +
> > + if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
> > + err = -EINVAL;
> > + break;
> > + }
> > +
> > + if (get_user(opt, (u8 __user *) optval)) {
> > + err = -EFAULT;
> > + break;
> > + }
> > +
> > + BT_DBG("opt %u", opt);
> > +
> > + err = l2cap_set_mode(chan, opt);
> > + if (err)
> > + break;
> > +
> > + BT_DBG("mode 0x%2.2x", chan->mode);
> > +
> > + break;
> > +
>
> So do we want BT_MODE as u8 or just simply as int?
For the mode alone I guess it would be fine, the question is if we
want to leave space to add other fields later but I guess we could do
that with use of new options instead.
> Regards
>
> Marcel
>
--
Luiz Augusto von Dentz
