Thanks for the heads up Doug. I'll resend the patch once I handle the
case where the reset is immediate and not a full unplug/replug.
In the meantime, please do not merge this patch.
Thanks
Abhishek
On Fri, Mar 20, 2020 at 1:00 PM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Thu, Mar 19, 2020 at 7:02 PM Abhishek Pandit-Subedi
> <abhishekpandit@xxxxxxxxxxxx> wrote:
> >
> > From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> >
> > When scanning for BLE devices for a longer period (e.g. because a
> > BLE device is paired, but not connected) the Marvell 8997 often
> > ends up in a borked state, which manifests through failures on
> > certain SDIO transactions.
> >
> > When such a SDIO failure is detected force a reset of the SDIO
> > card to initialize it from scratch. Since the SDIO bus is shared
> > with the WiFi part of the chip this also involves a reset of WiFi.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
> > ---
> >
> > drivers/bluetooth/btmrvl_sdio.c | 24 ++++++++++++++++++++++++
> > drivers/bluetooth/btmrvl_sdio.h | 1 +
> > 2 files changed, 25 insertions(+)
> >
> > diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
> > index 0f3a020703ab..69a8b6b3c11c 100644
> > --- a/drivers/bluetooth/btmrvl_sdio.c
> > +++ b/drivers/bluetooth/btmrvl_sdio.c
> > @@ -22,6 +22,8 @@
> > #include <linux/slab.h>
> > #include <linux/suspend.h>
> >
> > +#include <linux/mmc/core.h>
> > +#include <linux/mmc/card.h>
> > #include <linux/mmc/sdio_ids.h>
> > #include <linux/mmc/sdio_func.h>
> > #include <linux/module.h>
> > @@ -59,6 +61,23 @@ static const struct of_device_id btmrvl_sdio_of_match_table[] = {
> > { }
> > };
> >
> > +static void btmrvl_sdio_card_reset_work(struct work_struct *work)
> > +{
> > + struct btmrvl_sdio_card *card =
> > + container_of(work, struct btmrvl_sdio_card, reset_work);
> > + struct sdio_func *func = card->func;
> > +
> > + sdio_claim_host(func);
> > + mmc_hw_reset(func->card->host);
>
> The fact that you don't check the return value here seems like a
> problem. See specifically how commit cdb2256f795e ("mwifiex: Re-work
> support for SDIO HW reset") handles it.
>
> This is a distinct difference between the solution that we landed in
> Chrome OS 4.19 and what landed upstream. In Chrome OS 4.19 we went
> the simple approach and said that there was only one way to reset the
> card: treat it as a full unplug / replug of the card. ...but upstream
> adopted a different solution. For upstream if there is only a single
> function on the SD card it will not trigger a full unplug/replug and
> it's up to the function driver to re-init itself. This wasn't such a
> big deal for the WiFi driver since it already had a way to re-init
> itself (mwifiex_reinit_sw). I don't know how hard it will be for
> Bluetooth, but that needs to be part of this patch I think?
>
> -Doug
