Update the docs for Add Device with information on flags mask and value. Add information on the Wakeable flag that can be set to allow the device to wake the system from suspend. --- Changes in v4: * Newly added support in Add Device for flags Changes in v3: None Changes in v2: None doc/mgmt-api.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt index 27a41f334..e99c23710 100644 --- a/doc/mgmt-api.txt +++ b/doc/mgmt-api.txt @@ -1997,6 +1997,8 @@ Add Device Command Command Parameters: Address (6 Octets) Address_Type (1 Octet) Action (1 Octet) + Flags Mask (1 Octet) + Flags Value (1 Octet) Return Parameters: Address (6 Octets) Address_Type (1 Octet) @@ -2014,6 +2016,9 @@ Add Device Command 1 Allow incoming connection 2 Auto-connect remote device + The following flags are supported: + 0x1 Wakeable + With the Action 0, when the device is found, a new Device Found event will be sent indicating this device is available. This action is only valid for LE Public and LE Random address types. @@ -2036,6 +2041,13 @@ Add Device Command connectable setting is off. This acts as list of known trusted devices. + To set flags on the device, first set the bit in the mask for the + flag to set and then set or clear the bit in the value to indicate + whether the flag should be set. + + The Wakeable flag controls whether this device can wake the system + from suspend. + This command can be used when the controller is not powered and all settings will be programmed once powered. -- 2.25.1.696.g5e7596f4ac-goog
