[PATCH v3 3/3] Bluetooth: Add BT_MODE socket option

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>

This adds BT_MODE socket option which can be used to set L2CAP modes,
including modes only supported over LE which were not supported using
the L2CAP_OPTIONS.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
---
 include/net/bluetooth/bluetooth.h | 11 ++++
 net/bluetooth/l2cap_sock.c        | 96 +++++++++++++++++++++++++++++++
 2 files changed, 107 insertions(+)

diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 1576353a2773..34191e34bfdc 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -139,6 +139,17 @@ struct bt_voice {
 #define BT_PHY_LE_CODED_TX	0x00002000
 #define BT_PHY_LE_CODED_RX	0x00004000
 
+#define BT_MODE			15
+
+#define BT_MODE_BASIC		0x00
+#define BT_MODE_RETRANS		0x01
+#define BT_MODE_FLOWCTL		0x02
+#define BT_MODE_ERTM		0x03
+#define BT_MODE_STREAMING	0x04
+#define BT_MODE_EXT_FLOWCTL	0x05
+
+#define BT_MODE_LE_FLOWCTL	0x80
+
 __printf(1, 2)
 void bt_info(const char *fmt, ...);
 __printf(1, 2)
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 117ba20ea194..f2bb376c699f 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -500,6 +500,25 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname,
 	return err;
 }
 
+static u8 l2cap_get_mode(struct l2cap_chan *chan)
+{
+	switch (chan->mode) {
+	case L2CAP_MODE_BASIC:
+	case L2CAP_MODE_RETRANS:
+	case L2CAP_MODE_FLOWCTL:
+	case L2CAP_MODE_ERTM:
+	case L2CAP_MODE_STREAMING:
+		/* Mode above are the same on both old and new sockopt */
+		return chan->mode;
+	case L2CAP_MODE_LE_FLOWCTL:
+		return BT_MODE_FLOWCTL;
+	case L2CAP_MODE_EXT_FLOWCTL:
+		return BT_MODE_EXT_FLOWCTL;
+	}
+
+	return chan->mode;
+}
+
 static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
 				 char __user *optval, int __user *optlen)
 {
@@ -508,6 +527,7 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
 	struct bt_security sec;
 	struct bt_power pwr;
 	u32 phys;
+	u8 mode;
 	int len, err = 0;
 
 	BT_DBG("sk %p", sk);
@@ -624,6 +644,23 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,
 			err = -EFAULT;
 		break;
 
+	case BT_MODE:
+		if (!enable_ecred) {
+			err = -ENOPROTOOPT;
+			break;
+		}
+
+		if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+			err = -EINVAL;
+			break;
+		}
+
+		mode = l2cap_get_mode(chan);
+
+		if (put_user(mode, (u8 __user *) optval))
+			err = -EFAULT;
+		break;
+
 	default:
 		err = -ENOPROTOOPT;
 		break;
@@ -763,6 +800,36 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
 	return err;
 }
 
+static int l2cap_set_mode(struct l2cap_chan *chan, u8 mode)
+{
+	switch (mode) {
+	case BT_MODE_BASIC:
+		clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
+		break;
+	case BT_MODE_FLOWCTL:
+		if (bdaddr_type_is_le(chan->src_type))
+			mode = L2CAP_MODE_LE_FLOWCTL;
+		break;
+	case BT_MODE_EXT_FLOWCTL:
+		/* TODO: Add support for ECRED PDUs to BR/EDR */
+		if (!bdaddr_type_is_le(chan->src_type))
+			return -EINVAL;
+		mode = L2CAP_MODE_EXT_FLOWCTL;
+		break;
+	case BT_MODE_ERTM:
+	case BT_MODE_STREAMING:
+		if (!disable_ertm || bdaddr_type_is_le(chan->src_type))
+			break;
+		/* fall through */
+	default:
+		return -EINVAL;
+	}
+
+	chan->mode = mode;
+
+	return 0;
+}
+
 static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 				 char __user *optval, unsigned int optlen)
 {
@@ -968,6 +1035,35 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,
 
 		break;
 
+	case BT_MODE:
+		if (!enable_ecred) {
+			err = -ENOPROTOOPT;
+			break;
+		}
+
+		if (sk->sk_state != BT_BOUND) {
+			err = -EINVAL;
+			break;
+		}
+
+		if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
+			err = -EINVAL;
+			break;
+		}
+
+		if (get_user(opt, (u8 __user *) optval)) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = l2cap_set_mode(chan, opt);
+		if (err)
+			break;
+
+		BT_DBG("mode 0x%2.2x", chan->mode);
+
+		break;
+
 	default:
 		err = -ENOPROTOOPT;
 		break;
-- 
2.21.1




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux