Re: [RFC PATCH v5 0/5] Bluetooth: Handle system suspend gracefully

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sure -- patch incoming in a few minutes.

On Wed, Mar 11, 2020 at 8:03 AM Marcel Holtmann <marcel@xxxxxxxxxxxx> wrote:
>
> Hi Abhishek,
>
> > This patch series prepares the Bluetooth controller for system suspend
> > by disconnecting all devices and preparing the event filter and LE
> > whitelist with devices that can wake the system from suspend.
> >
> > The main motivation for doing this is so we can enable Bluetooth as
> > a wake up source during suspend without it being noisy. Bluetooth should
> > wake the system when a HID device receives user input but otherwise not
> > send any events to the host.
> >
> > This patch series was tested on several Chromebooks with both btusb and
> > hci_serdev on kernel 4.19. The set of tests was basically the following:
> > * Reconnects after suspend succeed
> > * HID devices can wake the system from suspend (needs some related bluez
> >  changes to call the Set Wake Capable management command)
> > * System properly pauses and unpauses discovery + advertising around
> >  suspend
> > * System does not wake from any events from non wakeable devices
> >
> > Series 2 has refactored the change into multiple smaller commits as
> > requested. I tried to simplify some of the whitelist filtering edge
> > cases but unfortunately it remains quite complex.
> >
> > Series 3 has refactored it further and should have resolved the
> > whitelisting complexity in series 2.
> >
> > Series 4 adds a fix to check for powered down and powering down adapters.
> >
> > Series 5 moves set_wake_capable to the last patch in the series and
> > changes BT_DBG to bt_dev_dbg.
> >
> > Please review and provide any feedback.
>
> so I was planning to apply patches 1-4. The only thing that I noticed was that patch 2 introduces the following warning.
>
>   CC      net/bluetooth/hci_request.o
> net/bluetooth/hci_request.c: In function ‘hci_req_prepare_suspend’:
> net/bluetooth/hci_request.c:973:6: warning: unused variable ‘old_state’ [-Wunused-variable]
>   973 |  int old_state;
>       |      ^~~~~~~~~
>
> I think this variable should only be introduced in patch 4. Are you able to respin this series so that the variable moves to patch 4. If not, I can try to fix this myself.
>
> Regards
>
> Marcel
>




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux