Hi Amit, On Thu, Feb 13, 2020 at 3:32 AM Amit K Bag <amit.k.bag@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote: > > Hello Luiz, > > I tested with the patch you have mentioned but not getting any better > throughput. > Please have a look at the log attached. > > We are using below configuration for linux > - Kernel : 4.19.102 > - OS : ubuntu 18.04.2 LTS > - Bluez -5.48 > > For other machine we are using windows I think there is some work to be done to work with RFCOMM since we are only doing this for L2CAP, I will have a look later this week, btw have you look into any difference we may have between these kernels? Or actually in what combination they appear because there could be an isolated problem in either the kernel or the userspace changes. > On Mon, Feb 10, 2020 at 11:03 PM Luiz Augusto von Dentz > <luiz.dentz@xxxxxxxxx> wrote: > > > > Hi Amit, > > > > On Mon, Feb 10, 2020 at 3:20 AM Amit K Bag > > <amit.k.bag@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote: > > > > > > Hello All, > > > > > > I am tring to test the OPP throughput in linux. > > > I transferred between 2 machines having ubuntu 16.04 with bluez > > > version 5.44 in that I am getting 1.4mbps speed. > > > > > > Kernel : 4.14.13 > > > OS : ubuntu 18.04.2 LTS > > > Bluez -5.44 > > > > > > I am using a 12 MB of audio file. > > > But the same file when I transferred between 2 machines having ubuntu > > > 18.04 the speed is significantly reduced. > > > > > > Kernel : 4.18.0-15-generic > > > OS : ubuntu 18.04.2 LTS > > > Bluez -5.48 > > > > > > Could someone tell me why its reduced in ubuntu 18.04 > > > > I don't think we change anything on Obexd related to that so perhaps > > it is something related to the L2CAP MTU? We could try setting the MTU > > to 0 so it automatically picks the matching MTU if you do have the > > following patch applied to your kernel: > > > > Bluetooth: Auto tune if input MTU is set to 0 > > > > > > -- > > Luiz Augusto von Dentz -- Luiz Augusto von Dentz
