Re: [PATCH v3 1/8] Bluetooth: Add definitions for CIS connections

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Luiz,

> These adds the HCI definitions for handling CIS connections along with
> ISO data packets.
> 
> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
> ---
> include/net/bluetooth/hci.h | 157 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 157 insertions(+)
> 
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index 07b6ecedc6ce..ba603f35c054 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -27,6 +27,7 @@
> 
> #define HCI_MAX_ACL_SIZE	1024
> #define HCI_MAX_SCO_SIZE	255
> +#define HCI_MAX_ISO_SIZE	251
> #define HCI_MAX_EVENT_SIZE	260
> #define HCI_MAX_FRAME_SIZE	(HCI_MAX_ACL_SIZE + 4)
> 
> @@ -303,6 +304,7 @@ enum {
> #define HCI_ACLDATA_PKT		0x02
> #define HCI_SCODATA_PKT		0x03
> #define HCI_EVENT_PKT		0x04
> +#define HCI_ISODATA_PKT		0x05
> #define HCI_DIAG_PKT		0xf0
> #define HCI_VENDOR_PKT		0xff
> 
> @@ -352,6 +354,15 @@ enum {
> #define ACL_ACTIVE_BCAST	0x04
> #define ACL_PICO_BCAST		0x08
> 
> +/* ISO PB flags */
> +#define ISO_START		0x00
> +#define ISO_CONT		0x01
> +#define ISO_SINGLE		0x02
> +#define ISO_END			0x03
> +
> +/* ISO TS flags */
> +#define ISO_TS			0x01
> +
> /* Baseband links */
> #define SCO_LINK	0x00
> #define ACL_LINK	0x01
> @@ -359,6 +370,7 @@ enum {
> /* Low Energy links do not have defined link type. Use invented one */
> #define LE_LINK		0x80
> #define AMP_LINK	0x81
> +#define ISO_LINK	0x82
> #define INVALID_LINK	0xff
> 
> /* LMP features */
> @@ -440,6 +452,8 @@ enum {
> #define HCI_LE_PHY_2M			0x01
> #define HCI_LE_PHY_CODED		0x08
> #define HCI_LE_CHAN_SEL_ALG2		0x40
> +#define HCI_LE_CIS_MASTER		0x10
> +#define HCI_LE_CIS_SLAVE		0x20
> 
> /* Connection modes */
> #define HCI_CM_ACTIVE	0x0000
> @@ -1718,6 +1732,86 @@ struct hci_cp_le_set_adv_set_rand_addr {
> 	bdaddr_t  bdaddr;
> } __packed;
> 
> +#define HCI_OP_LE_READ_BUFFER_SIZE_V2	0x2060
> +struct hci_rp_le_read_buffer_size_v2 {
> +	__u8  status;
> +	__u16 acl_mtu;
> +	__u8  acl_max_pkt;
> +	__u16 iso_mtu;
> +	__u8  iso_max_pkt;
> +} __attribute__ ((packed));

you need to go through this list. HCI is little endian and you need to use __le16 and __le32.

Regards

Marcel




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux