This patch adds a unified API qca_power_on() to support both wcn399x and Rome power on. For wcn399x it calls the qca_wcn3990_init() to init the regulators, and for Rome it pulls up the bt_en GPIO to power up the btsoc. It also moves all the power up operation from hdev->open() to hdev->setup(). Signed-off-by: Rocky Liao <rjliao@xxxxxxxxxxxxxx> Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> --- Changes in v2: None Changes in v3: -moved all the power up operation from open() to setup() -updated the commit message Changes in v4: -made a single call to qca_power_on() in setup() drivers/bluetooth/hci_qca.c | 48 +++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 18 deletions(-) diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index 82e4cd4b6663..6a67e5489b16 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -541,7 +541,6 @@ static int qca_open(struct hci_uart *hu) { struct qca_serdev *qcadev; struct qca_data *qca; - int ret; BT_DBG("hu %p qca_open", hu); @@ -582,23 +581,10 @@ static int qca_open(struct hci_uart *hu) hu->priv = qca; if (hu->serdev) { - qcadev = serdev_device_get_drvdata(hu->serdev); - if (!qca_is_wcn399x(qcadev->btsoc_type)) { - gpiod_set_value_cansleep(qcadev->bt_en, 1); - /* Controller needs time to bootup. */ - msleep(150); - } else { + if (qca_is_wcn399x(qcadev->btsoc_type)) { hu->init_speed = qcadev->init_speed; hu->oper_speed = qcadev->oper_speed; - ret = qca_regulator_enable(qcadev); - if (ret) { - destroy_workqueue(qca->workqueue); - kfree_skb(qca->rx_skb); - hu->priv = NULL; - kfree(qca); - return ret; - } } } @@ -1531,6 +1517,31 @@ static int qca_wcn3990_init(struct hci_uart *hu) return 0; } +static int qca_power_on(struct hci_dev *hdev) +{ + struct hci_uart *hu = hci_get_drvdata(hdev); + enum qca_btsoc_type soc_type = qca_soc_type(hu); + struct qca_serdev *qcadev; + int ret = 0; + + /* Non-serdev device usually is powered by external power + * and don't need additional action in driver for power on + */ + if (!hu->serdev) + return 0; + + if (qca_is_wcn399x(soc_type)) { + ret = qca_wcn3990_init(hu); + } else { + qcadev = serdev_device_get_drvdata(hu->serdev); + gpiod_set_value_cansleep(qcadev->bt_en, 1); + /* Controller needs time to bootup. */ + msleep(150); + } + + return ret; +} + static int qca_setup(struct hci_uart *hu) { struct hci_dev *hdev = hu->hdev; @@ -1553,6 +1564,10 @@ static int qca_setup(struct hci_uart *hu) */ set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); + ret = qca_power_on(hdev); + if (ret) + return ret; + if (qca_is_wcn399x(soc_type)) { bt_dev_info(hdev, "setting up wcn3990"); @@ -1562,9 +1577,6 @@ static int qca_setup(struct hci_uart *hu) set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks); set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); hu->hdev->shutdown = qca_power_off; - ret = qca_wcn3990_init(hu); - if (ret) - return ret; ret = qca_read_soc_version(hdev, &soc_ver, soc_type); if (ret) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project