Re: [PATCH Bluez v2] tools/mesh-cfgclient: add network transmit get/set commands

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Applied with minor re-arrange for multiple command adds
Thanks

On Mon, 2019-11-11 at 20:55 +0100, Aurelien Jarno wrote:
> Add network-transmit-get and network-transmit-set commands as per
> Mesh Profile 4.3.2.69, 4.3.2.70 and 4.3.2.71.
> ---
>  tools/mesh/cfgcli.c | 40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> Changes v1 -> v2:
>  - Fix the cnt/steps fields ordering
> 
> diff --git a/tools/mesh/cfgcli.c b/tools/mesh/cfgcli.c
> index a4de42943..04edc706c 100644
> --- a/tools/mesh/cfgcli.c
> +++ b/tools/mesh/cfgcli.c
> @@ -621,6 +621,15 @@ static bool msg_recvd(uint16_t src, uint16_t idx, uint8_t *data,
>  				src, mesh_status_str(data[0]));
>  
>  		break;
> +
> +	/* Per Mesh Profile 4.3.2.71 */
> +	case OP_CONFIG_NETWORK_TRANSMIT_STATUS:
> +		if (len != 1)
> +			return true;
> +
> +		bt_shell_printf("Node %4.4x: Network transmit cnt %d, steps %d\n",
> +				src, data[0] & 7, data[0] >> 3);
> +		break;
>  	}
>  
>  	return true;
> @@ -1334,6 +1343,33 @@ static void cmd_node_reset(int argc, char *argv[])
>  	cmd_default(OP_NODE_RESET);
>  }
>  
> +static void cmd_network_transmit_get(int argc, char *argv[])
> +{
> +	cmd_default(OP_CONFIG_NETWORK_TRANSMIT_GET);
> +}
> +
> +static void cmd_network_transmit_set(int argc, char *argv[])
> +{
> +	uint16_t n;
> +	uint8_t msg[2 + 1];
> +	int parm_cnt;
> +
> +	n = mesh_opcode_set(OP_CONFIG_NETWORK_TRANSMIT_SET, msg);
> +
> +	parm_cnt = read_input_parameters(argc, argv);
> +	if (parm_cnt != 2) {
> +		bt_shell_printf("bad arguments\n");
> +		return bt_shell_noninteractive_quit(EXIT_FAILURE);
> +	}
> +
> +	msg[n++] = parms[0] | (parms[1] << 3);
> +
> +	if (!config_send(msg, n, OP_CONFIG_NETWORK_TRANSMIT_SET))
> +		return bt_shell_noninteractive_quit(EXIT_FAILURE);
> +
> +	return bt_shell_noninteractive_quit(EXIT_SUCCESS);
> +}
> +
>  static bool tx_setup(model_send_msg_func_t send_func, void *user_data)
>  {
>  	if (!send_func)
> @@ -1414,6 +1450,10 @@ static const struct bt_shell_menu cfg_menu = {
>  				"Get subscription"},
>  	{"node-reset", NULL, cmd_node_reset,
>  				"Reset a node and remove it from network"},
> +	{"network-transmit-get", NULL, cmd_network_transmit_get,
> +				"Get network transmit state"},
> +	{"network-transmit-set", "<count> <steps>", cmd_network_transmit_set,
> +				"Set network transmit state"},
>  	{} },
>  };
>  




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux