Hi Rocky,
> This patch add support for QCA6390.
can we please be a bit more descriptive on what support we are adding.
>
> Signed-off-by: Rocky Liao <rjliao@xxxxxxxxxxxxxx>
> ---
> drivers/bluetooth/btqca.c | 32 +++++++++++++++++++++--------
> drivers/bluetooth/btqca.h | 1 +
> drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++++++++++---
> 3 files changed, 62 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index ec69e5dd7bd3..75990223e5e3 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -13,6 +13,8 @@
> #include "btqca.h"
>
> #define VERSION "0.1"
Lets put an extra empty line here.
> +#define QCA_IS_3991_6390(soc_type) \
> + ((soc_type == QCA_WCN3991) || (soc_type == QCA_QCA6390))
Actually (a == b || c == d) is enough.
I rather do ((a) == b || (c) == d) to ensure the parameter is properly protected. It is not needed in this case since the usage is simple.
>
> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> enum qca_btsoc_type soc_type)
> @@ -32,7 +34,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> * VSE event. WCN3991 sends version command response as a payload to
> * command complete event.
> */
> - if (soc_type == QCA_WCN3991) {
> + if (QCA_IS_3991_6390(soc_type)) {
> event_type = 0;
> rlen += 1;
> rtype = EDL_PATCH_VER_REQ_CMD;
> @@ -69,7 +71,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> goto out;
> }
>
> - if (soc_type == QCA_WCN3991)
> + if ((QCA_IS_3991_6390(soc_type)))
> memmove(&edl->data, &edl->data[1], sizeof(*ver));
Maybe these should just be turned into a switch statement and not using some macro.
>
> ver = (struct qca_btsoc_version *)(edl->data);
> @@ -139,7 +141,7 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
> EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
>
> static void qca_tlv_check_data(struct qca_fw_config *config,
> - const struct firmware *fw)
> + const struct firmware *fw, enum qca_btsoc_type soc_type)
> {
> const u8 *data;
> u32 type_len;
> @@ -148,6 +150,7 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
> struct tlv_type_hdr *tlv;
> struct tlv_type_patch *tlv_patch;
> struct tlv_type_nvm *tlv_nvm;
> + uint8_t nvm_baud_rate = config->user_baud_rate;
>
> tlv = (struct tlv_type_hdr *)fw->data;
>
> @@ -213,10 +216,14 @@ static void qca_tlv_check_data(struct qca_fw_config *config,
> * enabling software inband sleep
> * onto controller side.
> */
> - tlv_nvm->data[0] |= 0x80;
> + if (!QCA_IS_3991_6390(soc_type))
> + tlv_nvm->data[0] |= 0x80;
>
> /* UART Baud Rate */
> - tlv_nvm->data[2] = config->user_baud_rate;
> + if ((QCA_IS_3991_6390(soc_type)))
> + tlv_nvm->data[1] = nvm_baud_rate;
> + else
> + tlv_nvm->data[2] = nvm_baud_rate;
These two changes are not related to the QCA6390 support. Leave them out and if changes are needed to fix other hardware, then send them as separate patch.
>
> break;
>
> @@ -264,7 +271,7 @@ static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
> * VSE event. WCN3991 sends version command response as a payload to
> * command complete event.
> */
> - if (soc_type == QCA_WCN3991) {
> + if ((QCA_IS_3991_6390(soc_type))) {
> event_type = 0;
> rlen = sizeof(*edl);
> rtype = EDL_PATCH_TLV_REQ_CMD;
> @@ -297,7 +304,7 @@ static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
> err = -EIO;
> }
>
> - if (soc_type == QCA_WCN3991)
> + if ((QCA_IS_3991_6390(soc_type)))
> goto out;
>
> tlv_resp = (struct tlv_seg_resp *)(edl->data);
> @@ -354,7 +361,7 @@ static int qca_download_firmware(struct hci_dev *hdev,
> return ret;
> }
>
> - qca_tlv_check_data(config, fw);
> + qca_tlv_check_data(config, fw, soc_type);
>
> segment = fw->data;
> remain = fw->size;
> @@ -438,6 +445,12 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> (soc_ver & 0x0000000f);
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crbtfw%02x.tlv", rom_ver);
> + } else if (soc_type == QCA_QCA6390) {
> + rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
> + (soc_ver & 0x0000000f);
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/htbtfw%02x.tlv", rom_ver);
> +
> } else {
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/rampatch_%08x.bin", soc_ver);
> @@ -460,6 +473,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> else if (qca_is_wcn399x(soc_type))
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crnv%02x.bin", rom_ver);
> + else if (soc_type == QCA_QCA6390)
> + snprintf(config.fwname, sizeof(config.fwname),
> + "qca/htnv%02x.bin", rom_ver);
> else
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/nvm_%08x.bin", soc_ver);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index f5795b1a3779..2f06ed7e1c50 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -127,6 +127,7 @@ enum qca_btsoc_type {
> QCA_WCN3990,
> QCA_WCN3991,
> QCA_WCN3998,
> + QCA_QCA6390,
> };
>
> #if IS_ENABLED(CONFIG_BT_QCA)
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index f10bdf8e1fc5..472f468145e8 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -25,6 +25,7 @@
> #include <linux/mod_devicetable.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> +#include <linux/acpi.h>
> #include <linux/platform_device.h>
> #include <linux/regulator/consumer.h>
> #include <linux/serdev.h>
> @@ -1355,6 +1356,16 @@ static const struct hci_uart_proto qca_proto = {
> .dequeue = qca_dequeue,
> };
>
> +static const struct qca_vreg_data qca_soc_data_qca6174 = {
> + .soc_type = QCA_ROME,
> + .num_vregs = 0,
> +};
> +
> +static const struct qca_vreg_data qca_soc_data_qca6390 = {
> + .soc_type = QCA_QCA6390,
> + .num_vregs = 0,
> +};
> +
> static const struct qca_vreg_data qca_soc_data_wcn3990 = {
> .soc_type = QCA_WCN3990,
> .vregs = (struct qca_vreg []) {
> @@ -1501,7 +1512,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> return -ENOMEM;
>
> qcadev->serdev_hu.serdev = serdev;
> - data = of_device_get_match_data(&serdev->dev);
> + data = device_get_match_data(&serdev->dev);
I would address this in a separate patch since it seems you are actually fixing QCA6174 support as well. Or is this because the new platform is ACPI based. I can’t tell since you are missing a proper commit message.
> serdev_device_set_drvdata(serdev, qcadev);
> device_property_read_string(&serdev->dev, "firmware-name",
> &qcadev->firmware_name);
> @@ -1534,7 +1545,10 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> goto out;
> }
> } else {
> - qcadev->btsoc_type = QCA_ROME;
> + if (data)
> + qcadev->btsoc_type = data->soc_type;
> + else
> + qcadev->btsoc_type = QCA_ROME;
> qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
> GPIOD_OUT_LOW);
> if (IS_ERR(qcadev->bt_en)) {
> @@ -1670,21 +1684,41 @@ static int __maybe_unused qca_resume(struct device *dev)
>
> static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
>
> +#ifdef CONFIG_OF
> static const struct of_device_id qca_bluetooth_of_match[] = {
> - { .compatible = "qcom,qca6174-bt" },
> + { .compatible = "qcom,qca6174-bt" .data = &qca_soc_data_qca6174},
So this should be clearly a separate patch as mentioned above.
> + { .compatible = "qcom,qca6390-bt" .data = &qca_soc_data_qca6390},
> { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
> { .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
> { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
> +#endif
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
> + { "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
> +#endif
> +
>
> static struct serdev_device_driver qca_serdev_driver = {
> .probe = qca_serdev_probe,
> .remove = qca_serdev_remove,
> .driver = {
> .name = "hci_uart_qca",
> + #ifdef CONFIG_OF
> .of_match_table = qca_bluetooth_of_match,
> + #endif
> + #ifdef CONFIG_ACPI
> + .acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
> + #endif
These ifdefs are not needed. The ACPI_PTR does this automatically and there is another macro for OF as well that you can use.
> .pm = &qca_pm_ops,
> },
> };
Where is the patch addressing Kconfig dependency? If you support ACPI and DT platforms now, you need that.
Regards
Marcel
