Re: [PATCH] Input: uinput - Add UI_SET_UNIQ ioctl handler

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 5, 2019 at 2:52 AM Pali Rohár <pali.rohar@xxxxxxxxx> wrote:
>
> On Tuesday 03 December 2019 11:11:12 Dmitry Torokhov wrote:
> > On Tue, Dec 03, 2019 at 06:38:21PM +0100, Pali Rohár wrote:
> > > On Tuesday 03 December 2019 00:09:47 Pali Rohár wrote:
> > > > On Monday 02 December 2019 11:36:28 Dmitry Torokhov wrote:
> > > > > On Mon, Dec 02, 2019 at 07:53:40PM +0100, Pali Rohár wrote:
> > > > > > On Monday 02 December 2019 09:54:40 Dmitry Torokhov wrote:
> > > > > > > On Mon, Dec 02, 2019 at 09:47:50AM +0100, Pali Rohár wrote:
> > > > > > > > On Sunday 01 December 2019 17:23:05 Dmitry Torokhov wrote:
> > > > > > > > > Hi Pali,
> > > > > > > > >
> > > > > > > > > On Sun, Dec 01, 2019 at 03:53:57PM +0100, Pali Rohár wrote:
> > > > > > > > > > Hello!
> > > > > > > > > >
> > > > > > > > > > On Wednesday 27 November 2019 10:51:39 Abhishek Pandit-Subedi wrote:
> > > > > > > > > > > Support setting the uniq attribute of the input device. The uniq
> > > > > > > > > > > attribute is used as a unique identifier for the connected device.
> > > > > > > > > > >
> > > > > > > > > > > For example, uinput devices created by BlueZ will store the address of
> > > > > > > > > > > the connected device as the uniq property.
> > > > > > > > > > >
> > > > > > > > > > > Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
> > > > > > > > > >
> > > > > > > > > > ...
> > > > > > > > > >
> > > > > > > > > > > diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h
> > > > > > > > > > > index c9e677e3af1d..d5b7767c1b02 100644
> > > > > > > > > > > --- a/include/uapi/linux/uinput.h
> > > > > > > > > > > +++ b/include/uapi/linux/uinput.h
> > > > > > > > > > > @@ -145,6 +145,7 @@ struct uinput_abs_setup {
> > > > > > > > > > >  #define UI_SET_PHYS                _IOW(UINPUT_IOCTL_BASE, 108, char*)
> > > > > > > > > > >  #define UI_SET_SWBIT               _IOW(UINPUT_IOCTL_BASE, 109, int)
> > > > > > > > > > >  #define UI_SET_PROPBIT             _IOW(UINPUT_IOCTL_BASE, 110, int)
> > > > > > > > > > > +#define UI_SET_UNIQ                _IOW(UINPUT_IOCTL_BASE, 111, char*)
> > > > > > > > > >
> > > > > > > > > > I think that usage of char* as type in _IOW would cause compatibility
> > > > > > > > > > problems like it is for UI_SET_PHYS (there is UI_SET_PHYS_COMPAT). Size
> > > > > > > > > > of char* pointer depends on userspace (32 vs 64bit), so 32bit process on
> > > > > > > > > > 64bit kernel would not be able to call this new UI_SET_UNIQ ioctl.
> > > > > > > > > >
> > > > > > > > > > I would suggest to define this ioctl as e.g.:
> > > > > > > > > >
> > > > > > > > > >   #define UI_SET_UNIQ         _IOW(_IOC_WRITE, UINPUT_IOCTL_BASE, 111, 0)
> > > > > > > > > >
> > > > > > > > > > And then in uinput.c code handle it as:
> > > > > > > > > >
> > > > > > > > > >   case UI_SET_UNIQ & ~IOCSIZE_MASK:
> > > > > > > > > >
> > > > > > > > > > as part of section /* Now check variable-length commands */
> > > > > > > > >
> > > > > > > > > If we did not have UI_SET_PHYS in its current form, I'd agree with you,
> > > > > > > > > but I think there is benefit in having UI_SET_UNIQ be similar to
> > > > > > > > > UI_SET_PHYS.
> > > > > > > >
> > > > > > > > I thought that ioctl is just number, so we can define it as we want. And
> > > > > > > > because uinput.c has already switch for variable-length commands it
> > > > > > > > would be easy to use it. Final handling can be in separate function like
> > > > > > > > for UI_SET_PHYS which can look like same.
> > > > > > >
> > > > > > > Yes, we can define ioctl number as whatever we want. What I was trying
> > > > > > > to say, right now users do this:
> > > > > > >
> > > > > > >     rc = ioctl(fd, UI_SET_PHYS, "whatever");
> > > > > > >     ...
> > > > > > >
> > > > > > > and with UI_SET_UNIQ they expect the following to work:
> > > > > > >
> > > > > > >     rc = ioctl(fd, UI_SET_UNIQ, "whatever");
> > > > > > >     ...
> > > > > >
> > > > > > And would not following definition
> > > > > >
> > > > > >   #define UI_SET_UNIQ _IOW(_IOC_WRITE, UINPUT_IOCTL_BASE, 111, 0)
> > > > > >
> > > > > > allow userspace to call
> > > > > >
> > > > > >   rc = ioctl(fd, UI_SET_UNIQ, "whatever");
> > > > > >
> > > > > > as you want?
> > > > >
> > > > > OK, so what you are saying is that we can have whatever in the size
> > > > > portion of ioctl number and simply ignore it in the driver
> > > >
> > > > Yes.
> > > >
> > > > > (and I do not
> > > > > think we need to do any of "UI_SET_UNIQ & ~IOCSIZE_MASK" really).
> > > >
> > > > You are right, we do not need to clear any IOCSIZE_MASK. As ioctl number
> > > > would be always sam constant number. So it would be really simple. So
> > > > original patch would work if UI_SET_UNIQ define would be changed to
> > > > above with _IOW() macro.
> > > >
> > > > > While this would work, I am not sure it is the best option as I think
> > > > > we'd have to comment extensively why we have arbitrary number in place
> > > > > of the size.
> > > >
> > > > Comment can be added. But this is as ioctl is going to accept variable
> > > > length array (not fixed array), zero value make sense for me (zero as we
> > > > do not know exact size).
> > > >
> > > > > And we still do not really save anything, as we still have to go through
> > > > > compat ioctl handler (since we have it already) and it is very simple to
> > > > > add a case for UI_SET_UNIQ there...
> > > >
> > > > Yes, compat ioctl is still used. But my proposed solution does not
> > > > involve to define a new compact ioctl number just for sizeof(char *).
> > > >
> > > > I'm looking at this particular problem from side, that there is no
> > > > reason to define two new ioctl numbers for UI_SET_UNIQ (one normal
> > > > number and one compat number), when one number is enough. It is one new
> > > > ioctl call, so one ioctl number should be enough.
> > > >
> > > > And also with my proposed solution with ioctl size=0 it simplify
> > > > implementation of UI_SET_UNIQ as it is not needed to implement also
> > > > UI_SET_UNIQ_COMPAT ioctl nor touch compat ioct code path. Basically
> > > > original patch (with changed UI_SET_UNIQ macro) is enough.
> > > >
> > > > But of of course, this is my view of this problem and I would not be
> > > > against your decision from maintainer position. Both solutions would
> > > > work correctly and bring same behavior for userspace applications.
> > >
> > >
> > > Hi Dmitry!
> > >
> > > I was looking again at those _IOW defines for ioctl calls and I have
> > > another argument why not specify 'char *' in _IOW:
> > >
> > > All ioctls in _IOW() specify as a third macro argument type which is
> > > passed as pointer to the third argument for ioctl() syscall.
> > >
> > > So e.g.:
> > >
> > >   #define EVIOCSCLOCKID _IOW('E', 0xa0, int)
> > >
> > > is called from userspace as:
> > >
> > >   int val;
> > >   ioctl(fd, EVIOCSCLOCKID, &val);
> > >
> > > Or
> > >
> > >   #define EVIOCSMASK _IOW('E', 0x93, struct input_mask)
> > >
> > > is called as:
> > >
> > >   struct input_mask val;
> > >   ioctl(fd, EVIOCSMASK, &val);
> > >
> > > So basically third argument for _IOW specify size of byte buffer passed
> > > as third argument for ioctl(). In _IOW is not specified pointer to
> > > struct input_mask, but struct input_mask itself.
> > >
> > > And in case you define
> > >
> > >   #define MY_NEW_IOCTL _IOW(UINPUT_IOCTL_BASE, 200, char*)
> > >
> > > then you by above usage you should pass data as:
> > >
> > >   char *val = "DATA";
> > >   ioctl(fd, MY_NEW_IOCTL, &val);
> > >
> > > Which is not same as just:
> > >
> > >   ioctl(fd, MY_NEW_IOCTL, "DATA");
> > >
> > > As in former case you passed pointer to pointer to data and in later
> > > case you passed only pointer to data.
> > >
> > > It just mean that UI_SET_PHYS is already defined inconsistently which is
> > > also reason why compat ioctl for it was introduced.
> >
> > Yes, you are right. UI_SET_PHYS is messed up. I guess the question is
> > what to do with all of this...
> >
> > Maybe we should define
> >
> > #define UI_SET_PHYS_STR(len)  _IOC(_IOC_WRITE, UINPUT_IOCTL_BASE, 111, len)
> > #define UI_SET_UNIQ_STR(len)  _IOC(_IOC_WRITE, UINPUT_IOCTL_BASE, 112, len)
>
> I'm not sure if this is ideal. Normally in C strings are nul-termined,
> so functions/macros do not take buffer length.
Except strncpy, strndup, snprintf, etc. all expect a buffer length. At
the user to kernel boundary of ioctl, I think we should require size
of the user buffer regardless of the data type.

> _STR therefore in names looks inconsistent.
The _STR suffix is odd (what to name UI_SET_PHYS_STR then??) but
requiring the length seems to be common across various ioctls.
* input.h requires a length when requesting the phys and uniq
(https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/uapi/linux/input.h#n138)
* Same with HIDRAW when setting and getting features:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/uapi/linux/hidraw.h#n40,
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/samples/hidraw/hid-example.c#n88

>
> Maybe this is something which should be handled and unified at global
> scope of linux include files. Or al least make consensus how should be
> new ioctls for linux written.
>
> Otherwise each API would use different ioctl schema and mess would be
> still there. Which means that defining a new ioctl UI_SET_PHYS_STR for
> existing one UI_SET_PHYS does not fix anything -- but rather make mess a
> big larger.
>
> Or is there already some discussion on LKML about this ioctl problem?
I found this fairly old email (couldn't find something more recent):
http://lkml.iu.edu/hypermail/linux/kernel/9903.3/0325.html
I think the intent is for userspace to provide the size of the string
they're passing in (or at least the size of the allocated buffer that
has the string).

>
> > and mark UI_SET_PHYS as deprecated/wrong? This will allow us to specify
> > exactly how much data kernel is supposed to fetch from userspace instead
> > of trying to rely on a null-terminated string.
> >
> > It would also be very helpful if BlueZ did not accept changes that use
> > this brand new ioctl until after we agreed on how it should look like.
> > Luiz, can it be reverted for now please?
> >
> > Thanks.
> >
>
> --
> Pali Rohár
> pali.rohar@xxxxxxxxx


Abhishek




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux