On Sat, Nov 23, 2019 at 2:01 AM Marcel Holtmann <marcel@xxxxxxxxxxxx> wrote:
>
> From: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
>
> Add BCM vendor specific command to configure PCM parameters. The new
> vendor opcode allows us to set the sco routing, the pcm interface rate,
> and a few other pcm specific options (frame sync, sync mode, and clock
> mode). See broadcom-bluetooth.txt in Documentation for more information
> about valid values for those settings.
>
> Here is an example trace where this opcode was used to configure
> a BCM4354:
>
> < HCI Command: Vendor (0x3f|0x001c) plen 5
> 01 02 00 01 01
> > HCI Event: Command Complete (0x0e) plen 4
> Vendor (0x3f|0x001c) ncmd 1
> Status: Success (0x00)
>
> We can read back the values as well with ocf 0x001d to confirm the
> values that were set:
> $ hcitool cmd 0x3f 0x001d
> < HCI Command: ogf 0x3f, ocf 0x001d, plen 0
> > HCI Event: 0x0e plen 9
> 01 1D FC 00 01 02 00 01 01
>
> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
> Signed-off-by: Marcel Holtmann <marcel@xxxxxxxxxxxx>
> ---
> drivers/bluetooth/btbcm.c | 46 +++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btbcm.h | 16 ++++++++++++++
> 2 files changed, 62 insertions(+)
>
> diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
> index 8e05706fe5d9..0795a49edfae 100644
> --- a/drivers/bluetooth/btbcm.c
> +++ b/drivers/bluetooth/btbcm.c
> @@ -107,6 +107,52 @@ int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> }
> EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
>
> +int btbcm_read_pcm_int_params(struct hci_dev *hdev,
> + struct bcm_set_pcm_int_params *params)
> +{
> + struct sk_buff *skb;
> + int err = 0;
> +
> + skb = __hci_cmd_sync(hdev, 0xfc1d, 0, NULL, HCI_INIT_TIMEOUT);
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "BCM: Read PCM int params failed (%d)", err);
> + return err;
> + }
> +
> + if (skb->len != 6 || skb->data[0]) {
> + bt_dev_err(hdev, "BCM: Read PCM int params length mismatch");
> + kfree_skb(skb);
> + return -EIO;
> + }
> +
> + if (params)
> + memcpy(params, skb->data + 1, 5);
> +
> + kfree_skb(skb);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(btbcm_read_pcm_int_params);
> +
> +int btbcm_write_pcm_int_params(struct hci_dev *hdev,
> + const struct bcm_set_pcm_int_params *params)
> +{
> + struct sk_buff *skb;
> + int err;
> +
> + skb = __hci_cmd_sync(hdev, 0xfc1c, 5, params, HCI_INIT_TIMEOUT);
> + if (IS_ERR(skb)) {
> + err = PTR_ERR(skb);
> + bt_dev_err(hdev, "BCM: Write PCM int params failed (%d)", err);
> + return err;
> + }
> + kfree_skb(skb);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(btbcm_write_pcm_int_params);
> +
> int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
> {
> const struct hci_command_hdr *cmd;
> diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
> index d204be8a84bf..3c7dd0765837 100644
> --- a/drivers/bluetooth/btbcm.h
> +++ b/drivers/bluetooth/btbcm.h
> @@ -54,6 +54,10 @@ struct bcm_set_pcm_format_params {
> int btbcm_check_bdaddr(struct hci_dev *hdev);
> int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
> +int btbcm_read_pcm_int_params(struct hci_dev *hdev,
> + struct bcm_set_pcm_int_params *params);
> +int btbcm_write_pcm_int_params(struct hci_dev *hdev,
> + const struct bcm_set_pcm_int_params *params);
>
> int btbcm_setup_patchram(struct hci_dev *hdev);
> int btbcm_setup_apple(struct hci_dev *hdev);
> @@ -74,6 +78,18 @@ static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> return -EOPNOTSUPP;
> }
>
> +int btbcm_read_pcm_int_params(struct hci_dev *hdev,
> + struct bcm_set_pcm_int_params *params)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +int btbcm_write_pcm_int_params(struct hci_dev *hdev,
> + const struct bcm_set_pcm_int_params *params)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> static inline int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
> {
> return -EOPNOTSUPP;
> --
> 2.23.0
>
Looks good to me.
