Hi, On Wed, Oct 9, 2019 at 1:56 AM yayfortrees <yayfortrees@xxxxxxxxx> wrote: > > Hello, > > I've attached btmon traces for 5.50 and 5.51. Thanks for taking a look! > > Let me know if you need anything else. Must likely the following error has something to do with it: = bluetoothd: a2dp-sink profile connect failed for 34:DF:2A:0D:F8:C2: Device or resource busy I will check why this could be happening. > On Tue, Oct 8, 2019 at 4:24 AM Luiz Augusto von Dentz > <luiz.dentz@xxxxxxxxx> wrote: > > > > Hi, > > > > On Mon, Oct 7, 2019 at 10:34 PM yayfortrees <yayfortrees@xxxxxxxxx> wrote: > > > > > > Hello, > > > > > > I recently upgraded bluez to 5.51 from 5.50 and my headphones stopped > > > using the A2DP sink during autoconnect. The headphones instead go to > > > HSP/HFP mode and the A2DP sink is disabled in pavucontrol/pactl. The > > > A2DP sink will only work when the device is initially paired. > > > > > > This had worked flawlessly for years. I was able to track down the > > > regression to this patch: > > > https://www.spinics.net/lists/linux-bluetooth/msg76180.html ([PATCH > > > BlueZ] policy: Add logic to connect a Sink). If I apply the patch to > > > 5.50, my headphones no longer connect to the A2DP sink, if I remove it > > > the problem goes away. > > > > > > Not sure what else I should include to help track this down. The > > > headphones I'm using are Beats Wireless (Solo Bluetooth). > > > > > > The only relevant log entry I see with the patch applied is: > > > a2dp-sink profile connect failed for 34:DF:2A:0D:F8:C2: Device or resource busy > > > > Can you collect the HCI traces of the problem using btmon? I didn't > > expect that to cause any problems, it should in theory solve them but > > lets see. > > > > > Let me know if any other information is needed. > > > Thanks. > > > > > > > > -- > > Luiz Augusto von Dentz -- Luiz Augusto von Dentz
