[PATCHv2 2/4] ARM: dts: IGEP: Add WiLink UART node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>

Add a node for the UART part of WiLink chip.

Tested-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/omap3-igep0020-rev-f.dts | 8 ++++++++
 arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 8 ++++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 03dcd05fb8a0..001decc20b3d 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -49,3 +49,11 @@
 		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */
 	};
 };
+
+&uart2 {
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+		max-speed = <300000>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 060acd1e803a..9a8975799e16 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -71,3 +71,11 @@
 		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
 	};
 };
+
+&uart2 {
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
+		max-speed = <300000>;
+	};
+};
-- 
2.23.0




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux