Hi Matias,
> Because of both sides doing L2CAP disconnection at the same time, it
> was possible to receive L2CAP Disconnection Response with CID that was
> already freed. That caused problems if CID was already reused and L2CAP
> Connection Request with same CID was sent out. Before this patch kernel
> deleted channel context regardless of the state of the channel.
>
> Example where leftover Disconnection Response (frame #402) causes local
> device to delete L2CAP channel which was not yet connected. This in
> turn confuses remote device's stack because same CID is re-used without
> properly disconnecting.
>
> Btmon capture before patch:
> ** snip **
>> ACL Data RX: Handle 43 flags 0x02 dlen 8 #394 [hci1] 10.748949
> Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
> RFCOMM: Disconnect (DISC) (0x43)
> Address: 0x03 cr 1 dlci 0x00
> Control: 0x53 poll/final 1
> Length: 0
> FCS: 0xfd
> < ACL Data TX: Handle 43 flags 0x00 dlen 8 #395 [hci1] 10.749062
> Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
> RFCOMM: Unnumbered Ack (UA) (0x63)
> Address: 0x03 cr 1 dlci 0x00
> Control: 0x73 poll/final 1
> Length: 0
> FCS: 0xd7
> < ACL Data TX: Handle 43 flags 0x00 dlen 12 #396 [hci1] 10.749073
> L2CAP: Disconnection Request (0x06) ident 17 len 4
> Destination CID: 65
> Source CID: 65
>> HCI Event: Number of Completed Packets (0x13) plen 5 #397 [hci1] 10.752391
> Num handles: 1
> Handle: 43
> Count: 1
>> HCI Event: Number of Completed Packets (0x13) plen 5 #398 [hci1] 10.753394
> Num handles: 1
> Handle: 43
> Count: 1
>> ACL Data RX: Handle 43 flags 0x02 dlen 12 #399 [hci1] 10.756499
> L2CAP: Disconnection Request (0x06) ident 26 len 4
> Destination CID: 65
> Source CID: 65
> < ACL Data TX: Handle 43 flags 0x00 dlen 12 #400 [hci1] 10.756548
> L2CAP: Disconnection Response (0x07) ident 26 len 4
> Destination CID: 65
> Source CID: 65
> < ACL Data TX: Handle 43 flags 0x00 dlen 12 #401 [hci1] 10.757459
> L2CAP: Connection Request (0x02) ident 18 len 4
> PSM: 1 (0x0001)
> Source CID: 65
>> ACL Data RX: Handle 43 flags 0x02 dlen 12 #402 [hci1] 10.759148
> L2CAP: Disconnection Response (0x07) ident 17 len 4
> Destination CID: 65
> Source CID: 65
> = bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o.. 10.759447
>> HCI Event: Number of Completed Packets (0x13) plen 5 #403 [hci1] 10.759386
> Num handles: 1
> Handle: 43
> Count: 1
>> ACL Data RX: Handle 43 flags 0x02 dlen 12 #404 [hci1] 10.760397
> L2CAP: Connection Request (0x02) ident 27 len 4
> PSM: 3 (0x0003)
> Source CID: 65
> < ACL Data TX: Handle 43 flags 0x00 dlen 16 #405 [hci1] 10.760441
> L2CAP: Connection Response (0x03) ident 27 len 8
> Destination CID: 65
> Source CID: 65
> Result: Connection successful (0x0000)
> Status: No further information available (0x0000)
> < ACL Data TX: Handle 43 flags 0x00 dlen 27 #406 [hci1] 10.760449
> L2CAP: Configure Request (0x04) ident 19 len 19
> Destination CID: 65
> Flags: 0x0000
> Option: Maximum Transmission Unit (0x01) [mandatory]
> MTU: 1013
> Option: Retransmission and Flow Control (0x04) [mandatory]
> Mode: Basic (0x00)
> TX window size: 0
> Max transmit: 0
> Retransmission timeout: 0
> Monitor timeout: 0
> Maximum PDU size: 0
>> HCI Event: Number of Completed Packets (0x13) plen 5 #407 [hci1] 10.761399
> Num handles: 1
> Handle: 43
> Count: 1
>> ACL Data RX: Handle 43 flags 0x02 dlen 16 #408 [hci1] 10.762942
> L2CAP: Connection Response (0x03) ident 18 len 8
> Destination CID: 66
> Source CID: 65
> Result: Connection successful (0x0000)
> Status: No further information available (0x0000)
> *snip*
>
> Similar case after the patch:
> *snip*
>> ACL Data RX: Handle 43 flags 0x02 dlen 8 #22702 [hci0] 1664.411056
> Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
> RFCOMM: Disconnect (DISC) (0x43)
> Address: 0x03 cr 1 dlci 0x00
> Control: 0x53 poll/final 1
> Length: 0
> FCS: 0xfd
> < ACL Data TX: Handle 43 flags 0x00 dlen 8 #22703 [hci0] 1664.411136
> Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
> RFCOMM: Unnumbered Ack (UA) (0x63)
> Address: 0x03 cr 1 dlci 0x00
> Control: 0x73 poll/final 1
> Length: 0
> FCS: 0xd7
> < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22704 [hci0] 1664.411143
> L2CAP: Disconnection Request (0x06) ident 11 len 4
> Destination CID: 65
> Source CID: 65
>> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22705 [hci0] 1664.414009
> Num handles: 1
> Handle: 43
> Count: 1
>> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22706 [hci0] 1664.415007
> Num handles: 1
> Handle: 43
> Count: 1
>> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22707 [hci0] 1664.418674
> L2CAP: Disconnection Request (0x06) ident 17 len 4
> Destination CID: 65
> Source CID: 65
> < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22708 [hci0] 1664.418762
> L2CAP: Disconnection Response (0x07) ident 17 len 4
> Destination CID: 65
> Source CID: 65
> < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22709 [hci0] 1664.421073
> L2CAP: Connection Request (0x02) ident 12 len 4
> PSM: 1 (0x0001)
> Source CID: 65
>> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22710 [hci0] 1664.421371
> L2CAP: Disconnection Response (0x07) ident 11 len 4
> Destination CID: 65
> Source CID: 65
>> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22711 [hci0] 1664.424082
> Num handles: 1
> Handle: 43
> Count: 1
>> HCI Event: Number of Completed Pac.. (0x13) plen 5 #22712 [hci0] 1664.425040
> Num handles: 1
> Handle: 43
> Count: 1
>> ACL Data RX: Handle 43 flags 0x02 dlen 12 #22713 [hci0] 1664.426103
> L2CAP: Connection Request (0x02) ident 18 len 4
> PSM: 3 (0x0003)
> Source CID: 65
> < ACL Data TX: Handle 43 flags 0x00 dlen 16 #22714 [hci0] 1664.426186
> L2CAP: Connection Response (0x03) ident 18 len 8
> Destination CID: 66
> Source CID: 65
> Result: Connection successful (0x0000)
> Status: No further information available (0x0000)
> < ACL Data TX: Handle 43 flags 0x00 dlen 27 #22715 [hci0] 1664.426196
> L2CAP: Configure Request (0x04) ident 13 len 19
> Destination CID: 65
> Flags: 0x0000
> Option: Maximum Transmission Unit (0x01) [mandatory]
> MTU: 1013
> Option: Retransmission and Flow Control (0x04) [mandatory]
> Mode: Basic (0x00)
> TX window size: 0
> Max transmit: 0
> Retransmission timeout: 0
> Monitor timeout: 0
> Maximum PDU size: 0
>> ACL Data RX: Handle 43 flags 0x02 dlen 16 #22716 [hci0] 1664.428804
> L2CAP: Connection Response (0x03) ident 12 len 8
> Destination CID: 66
> Source CID: 65
> Result: Connection successful (0x0000)
> Status: No further information available (0x0000)
> *snip*
>
> Fix is to check that channel is in state BT_DISCONN before deleting the
> channel.
>
> This bug was found while fuzzing Bluez's OBEX implementation using
> Synopsys Defensics.
>
> Reported-by: Matti Kamunen <matti.kamunen@xxxxxxxxxxxx>
> Reported-by: Ari Timonen <ari.timonen@xxxxxxxxxxxx>
> Signed-off-by: Matias Karhumaa <matias.karhumaa@xxxxxxxxx>
> ---
> net/bluetooth/l2cap_core.c | 6 ++++++
> 1 file changed, 6 insertions(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel
