Hello all, I'm running on two identical embedded Linux Gateway devices, both on Ubuntu 16.04 and Bluez 5.37. That's certainly an older version, but it's part and parcel of that version of Ubuntu. I'm having an issue where the two identical gateway devices are getting different responses from a BLE scan, and can't figure out what would be the cause. In both cases it's the same peripheral device, a TI CC2650 device. On one gateway I get a truncated response with just the MAC address and in the other I get the MAC address plus the description string "CC2650.." [bluepy.btle:37] Got: 'rsp=$scan\x1eaddr=b546C0E530068\x1etype=h1\x1erssi=h43\x1eflag=h0\x1ed=b020105030280AA06FF0D0003000011094343323635302053656E736F72546167051208002003020A00\n' [bluepy.btle:37] Got: 'rsp=$scan\x1eaddr=b546C0E530068\x1etype=h1\x1erssi=h28\x1eflag=h0\x1ed=b020105030280AA06FF0D00030000\n' I'm probably going to have to get a Bluetooth sniffer device to trace this issue, but if anybody had any idea what this would be the case, I'd love to hear. Perhaps even though the Gateways are running the same Hardware and Software there might be a Hardware difference in the chipset used or something. It's all I can think of. Hopefully get something to help diagnose this issue. In those two messages there is a difference in RSS, is that signal strength and could that be the issue? Have to open things up. Thanks in advance for any help, and apologies I'm at the wrong end of a learning curve. John