Hi!
As I promised the following is the output of the sudo btmon -t:
Bluetooth monitor ver 5.37
= New Index: 2C:33:7A:F2:01:56 (BR/EDR,USB,hci0) [hci0]
09:05:50.702817
= Open Index: 2C:33:7A:F2:01:56 [hci0]
09:05:50.702817
= Index Info: 2C:33:7A:F2:01:56 (Broadcom Corporation) [hci0]
09:05:50.702817
< HCI Command: Create Connection (0x01|0x0005) plen 13 [hci0]
09:07:08.192394
Address: CD:AF:51:0C:34:BF (OUI CD-AF-51)
Packet type: 0xcc18
DM1 may be used
DH1 may be used
DM3 may be used
DH3 may be used
DM5 may be used
DH5 may be used
Page scan repetition mode: R2 (0x02)
Page scan mode: Mandatory (0x00)
Clock offset: 0x0000
Role switch: Allow slave (0x01)
> HCI Event: Command Status (0x0f) plen 4 [hci0]
09:07:08.193165
Create Connection (0x01|0x0005) ncmd 1
Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11 [hci0]
09:07:38.841272
Status: LMP Response Timeout / LL Response Timeout (0x22)
Handle: 12
Address: CD:AF:51:0C:34:BF (OUI CD-AF-51)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
@ Connect Failed: CD:AF:51:0C:34:BF (0) status 0x08
< HCI Command: LE Set Random Add.. (0x08|0x0005) plen 6 [hci0]
09:08:08.321207
Address: 17:0A:49:B4:38:4A (Non-Resolvable)
> HCI Event: Command Complete (0x0e) plen 4 [hci0]
09:08:08.322317
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Param.. (0x08|0x000b) plen 7 [hci0]
09:08:08.322367
Type: Active (0x01)
Interval: 11.250 msec (0x0012)
Window: 11.250 msec (0x0012)
Own address type: Random (0x01)
Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4 [hci0]
09:08:08.323311
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0]
09:08:08.323344
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 [hci0]
09:08:08.324311
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
@ Discovering: 0x01 (7)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0]
09:08:13.460023
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4 [hci0]
09:08:13.462277
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
< HCI Command: Inquiry (0x01|0x0001) plen 5 [hci0]
09:08:13.462302
Access code: 0x9e8b33 (General Inquiry)
Length: 5.12s (0x04)
Num responses: 0
> HCI Event: Command Status (0x0f) plen 4 [hci0]
09:08:13.468275
Inquiry (0x01|0x0001) ncmd 1
Status: Success (0x00)
> HCI Event: Inquiry Complete (0x01) plen 1 [hci0]
09:08:18.591332
Status: Success (0x00)
@ Discovering: 0x00 (7)
< HCI Command: LE Set Random Add.. (0x08|0x0005) plen 6 [hci0]
09:08:24.326331
Address: 3C:0B:A7:7E:04:DA (Non-Resolvable)
> HCI Event: Command Complete (0x0e) plen 4 [hci0]
09:08:24.327311
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Param.. (0x08|0x000b) plen 7 [hci0]
09:08:24.327329
Type: Active (0x01)
Interval: 11.250 msec (0x0012)
Window: 11.250 msec (0x0012)
Own address type: Random (0x01)
Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4 [hci0]
09:08:24.328350
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 [hci0]
09:08:24.328381
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 [hci0]
09:08:24.329293
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
@ Discovering: 0x01 (7)
Thanks in advance,
Matteo
Il 29/05/19 14:22, Luiz Augusto von Dentz ha scritto:
Hi Matteo,
On Tue, May 28, 2019 at 11:10 PM Matteo Formigli
<matteo.formigli@xxxxxxxxx> wrote:
Hi Luiz!
First, thanks for your answer! For now I can't upgrade my ubuntu, but I
already tried to upgrade bluez launching classic shell commands such as
apt-get update, upgrade and dist-upgrade. But bluez remains at version
5.37. I have to tell you that I tried to uninstall bluez and than
reinstall it. It was a gamble and maybe it went wrong, but I'm not sure.
About the logs and the HCI traces I don't have knowledge to provide you
what you want on my own. Can you tell me what commands i have to put in
the terminal?
5.37 is quite old so there is a high risk there something new, like
LE/GATT connection, that happens to be unstable at that point. You can
use btmon to collect the the HCI traces:
sudo btmon -t
You can also check the daemon logs with:
sudo journalctl --unit=bluetooth.service
Thanks in advance for your help!
Matteo
Il 28/05/19 20:54, Luiz Augusto von Dentz ha scritto:
Hi Matteo,
On Tue, May 28, 2019 at 9:38 PM Matteo Formigli
<matteo.formigli@xxxxxxxxx> wrote:
Hi all!
I am using Ubuntu 16.04 and there is no way to make the bluetooth work.
Every time I try to pair to my bluetooth headset bluez crashes. I really
don't know where to start solving this problem and I really hope that
someone on this list can help me.
Maybe it would help if you update your version of BlueZ, or better yet
update your ubuntu, if that still doesn't work then we may have a look
at some logs and HCI traces.
Thanks in advance for your help!
Matteo
P.s. The following is the output of the dpkg --status of the bluez packgage
:~$ dpkg --status bluez
Package: bluez
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 4119
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@xxxxxxxxxxxxxxxx>
Architecture: amd64
Multi-Arch: foreign
Version: 5.37-0ubuntu5.1
Replaces: bluez-alsa, bluez-audio (<= 3.36-3), bluez-input,
bluez-network, bluez-serial, bluez-utils (<= 3.36-3), udev (<< 170-1)
Depends: libc6 (>= 2.15), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>=
2.31.8), libreadline6 (>= 6.0), libudev1 (>= 196), init-system-helpers
(>= 1.18~), lsb-base (>= 4.1+Debian11ubuntu7), kmod, udev (>= 170-1), dbus
Breaks: udev (<< 170-1)
Conflicts: bluez-alsa, bluez-audio (<= 3.36-3), bluez-utils (<= 3.36-3)
Conffiles:
/etc/bluetooth/input.conf
/etc/bluetooth/main.conf
/etc/bluetooth/network.conf
/etc/bluetooth/proximity.conf
/etc/dbus-1/system.d/bluetooth.conf
/etc/init.d/bluetooth
/etc/init/bluetooth.conf
Description: Bluetooth tools and daemons
This package contains tools and system daemons for using Bluetooth
devices.
.
BlueZ is the official Linux Bluetooth protocol stack. It is an Open
Source
project distributed under GNU General Public License (GPL).
Homepage: http://www.bluez.org
Original-Maintainer: Debian Bluetooth Maintainers
<pkg-bluetooth-maintainers@xxxxxxxxxxxxxxxx
