[PATCH] Bluetooth: hci_qca: Load customized NVM based on the device property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



QCA BTSOC nvm is a customized file and different vendor/platoform may want
to have different BTSOC configuration via this file (e.g. Configure SCO over
PCM or I2S, Setting Tx power, etc.) This patch will allow vendors to download
different nvm file by reading a device property as the nvm file name postfix.

Signed-off-by: Rocky Liao <rjliao@xxxxxxxxxxxxxx>
---
 drivers/bluetooth/btqca.c   | 13 +++++++++----
 drivers/bluetooth/btqca.h   |  4 ++--
 drivers/bluetooth/hci_qca.c | 18 +++++++++++++++++-
 3 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 6122685..81e42f3 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -332,7 +332,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
 
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
-		   enum qca_btsoc_type soc_type, u32 soc_ver)
+		   enum qca_btsoc_type soc_type, u32 soc_ver, const char *nvm_postfix)
 {
 	struct rome_config config;
 	int err;
@@ -368,9 +368,14 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	if (soc_type == QCA_WCN3990)
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/crnv%02x.bin", rom_ver);
-	else
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/nvm_%08x.bin", soc_ver);
+	else {
+		if (NULL == nvm_postfix)
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/nvm_%08x.bin", soc_ver);
+		else
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/nvm_%08x_%s.bin", soc_ver, nvm_postfix);
+	}
 
 	err = qca_download_firmware(hdev, &config);
 	if (err < 0) {
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 6fdc25d..60a868f 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -139,7 +139,7 @@ enum qca_btsoc_type {
 
 int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
-		   enum qca_btsoc_type soc_type, u32 soc_ver);
+		   enum qca_btsoc_type soc_type, u32 soc_ver, const char *nvm_postfix);
 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
 int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 #else
@@ -150,7 +150,7 @@ static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
 }
 
 static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
-				 enum qca_btsoc_type soc_type, u32 soc_ver)
+				 enum qca_btsoc_type soc_type, u32 soc_ver, const char *nvm_postfix)
 {
 	return -EOPNOTSUPP;
 }
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 4ea995d..f495f3b 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -164,6 +164,7 @@ struct qca_serdev {
 	struct hci_uart	 serdev_hu;
 	struct gpio_desc *bt_en;
 	struct clk	 *susclk;
+	const char   *nvm_postfix;
 	enum qca_btsoc_type btsoc_type;
 	struct qca_power *bt_power;
 	u32 init_speed;
@@ -189,6 +190,17 @@ static enum qca_btsoc_type qca_soc_type(struct hci_uart *hu)
 	return soc_type;
 }
 
+static const char *qca_get_nvm_postfix(struct hci_uart *hu)
+{
+	if (hu->serdev) {
+		struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
+
+		return qsd->nvm_postfix;
+	} else {
+		return NULL;
+	}
+}
+
 static void __serial_clock_on(struct tty_struct *tty)
 {
 	/* TODO: Some chipset requires to enable UART clock on client
@@ -1191,6 +1203,7 @@ static int qca_setup(struct hci_uart *hu)
 	struct qca_data *qca = hu->priv;
 	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
+	const char *nvm_postfix = qca_get_nvm_postfix(hu);
 	int ret;
 	int soc_ver = 0;
 
@@ -1241,7 +1254,7 @@ static int qca_setup(struct hci_uart *hu)
 
 	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
 	/* Setup patch / NVM configurations */
-	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver);
+	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver, nvm_postfix);
 	if (!ret) {
 		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);
@@ -1462,6 +1475,9 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 			return PTR_ERR(qcadev->bt_en);
 		}
 
+		device_property_read_string(&serdev->dev, "nvm-postfix",
+					 &qcadev->nvm_postfix);
+
 		qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
 		if (IS_ERR(qcadev->susclk)) {
 			dev_err(&serdev->dev, "failed to acquire clk\n");
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux