>From 6591fb4e6bbac53a9b3b852a2a4160c8de315d97 Mon Sep 17 00:00:00 2001
From: Hemantkumar Suthar <shemant@xxxxxxxxxxx>
This patch adds support for 8977 chipset to mwifiex with SDIO
interface. Register offsets and supported feature flags are
updated. Firmware image used will be mrvl/sd8977_uapsta.bin.
Signed-off-by: Hemantkumar Suthar <shemant@xxxxxxxxxxx>
Signed-off-by: Rakesh Parmar <rakeshp@xxxxxxxxxxx>
Signed-off-by: Cathy Luo <cluo@xxxxxxxxxxx>
Signed-off-by: Ganapathi Bhat <gbhat@xxxxxxxxxxx>
---
drivers/bluetooth/Kconfig | 4 ++--
drivers/bluetooth/btmrvl_sdio.c | 36 ++++++++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 845b031..7b2e76e 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -336,7 +336,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
- Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997.
+ Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8997.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
@@ -350,7 +350,7 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
- devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997
+ devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997
chipsets are supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index fb3d039..b2712a5 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -211,6 +211,29 @@ static int btmrvl_sdio_probe_of(struct device *dev,
.fw_dump_end = 0xea,
};
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8977 = {
+ .cfg = 0x00,
+ .host_int_mask = 0x08,
+ .host_intstatus = 0x0c,
+ .card_status = 0x5c,
+ .sq_read_base_addr_a0 = 0xf8,
+ .sq_read_base_addr_a1 = 0xf9,
+ .card_revision = 0xc8,
+ .card_fw_status0 = 0xe8,
+ .card_fw_status1 = 0xe9,
+ .card_rx_len = 0xea,
+ .card_rx_unit = 0xeb,
+ .io_port_0 = 0xe4,
+ .io_port_1 = 0xe5,
+ .io_port_2 = 0xe6,
+ .int_read_to_clear = true,
+ .host_int_rsr = 0x04,
+ .card_misc_cfg = 0xD8,
+ .fw_dump_ctrl = 0xf0,
+ .fw_dump_start = 0xf1,
+ .fw_dump_end = 0xf8,
+};
+
static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
.cfg = 0x00,
.host_int_mask = 0x08,
@@ -279,6 +302,15 @@ static int btmrvl_sdio_probe_of(struct device *dev,
.supports_fw_dump = true,
};
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
+ .helper = NULL,
+ .firmware = "mrvl/sd8977_uapsta.bin",
+ .reg = &btmrvl_reg_8977,
+ .support_pscan_win_report = true,
+ .sd_blksz_fw_dl = 256,
+ .supports_fw_dump = true,
+};
+
static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
.helper = NULL,
.firmware = "mrvl/sd8997_uapsta.bin",
@@ -307,6 +339,9 @@ static int btmrvl_sdio_probe_of(struct device *dev,
/* Marvell SD8897 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
.driver_data = (unsigned long)&btmrvl_sdio_sd8897 },
+ /* Marvell SD8977 Bluetooth device */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9146),
+ .driver_data = (unsigned long)&btmrvl_sdio_sd8977 },
/* Marvell SD8997 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9142),
.driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
@@ -1760,4 +1795,5 @@ static void __exit btmrvl_sdio_exit_module(void)
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8977_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8997_uapsta.bin");
--
1.9.1
