Hi! > > This moves all remaining users of the legacy TI_ST driver to hcill (patches > > 1-3). Then patches 4-7 convert wl128x-radio driver to a standard platform > > device driver with support for multiple instances. Patch 7 will result in > > (userless) TI_ST driver no longer supporting radio at runtime. Patch 8-11 do > > some cleanups in the wl128x-radio driver. Finally patch 12 removes the TI_ST > > specific parts from wl128x-radio and adds the required infrastructure to use it > > with the serdev hcill driver instead. The remaining patches 13 and 14 remove > > the old TI_ST code. > > > > The new code has been tested on the Motorola Droid 4. For testing the audio > > should be configured to route Ext to Speaker or Headphone. Then you need to > > plug headphone, since its cable is used as antenna. For testing there is a > > 'radio' utility packages in Debian. When you start the utility you need to > > specify a frequency, since initial get_frequency returns an error: > > > > $ radio -f 100.0 > > Ok, it seems the driver does not work built-in, due to firmware issue: > > root@devuan:/home/user# dmesg | grep wl12 > [ 1.018951] reg-fixed-voltage regulator-wl12xx: GPIO lookup for > consumer (null) > [ 1.026550] reg-fixed-voltage regulator-wl12xx: using device tree > for GPIO lookup > [ 1.034271] of_get_named_gpiod_flags: can't parse 'gpios' property > of node '/regulator-wl12xx[0]' > [ 1.043487] of_get_named_gpiod_flags: parsed 'gpio' property of > node '/regulator-wl12xx[0]' - status (0) > [ 4.151885] wl12xx_driver wl12xx.1.auto: Direct firmware load for > ti-connectivity/wl128x-nvs.bin failed with error -2 > [ 11.368286] vwl1271: disabling > root@devuan:/home/user# find /lib/firmware/ | grep wl128 > /lib/firmware/ti-connectivity/wl128x-fw-5-plt.bin > /lib/firmware/ti-connectivity/wl128x-fw-5-mr.bin > /lib/firmware/ti-connectivity/wl128x-fw-5-sr.bin > /lib/firmware/ti-connectivity/wl128x-nvs.bin > root@devuan:/home/user# > > Ideas welcome... ... ... am I supposed to compile wl128-nvs.bin into > the kernel using EXTRA_FIRMWARE? EXTRA_FIRMWARE gets me further... some of it was not in debian. "Speaker right" needs to be set to "Ext" in alsamixer, and then... it works! :-) Quality does not seem to be great, but that may be mixer settings or something. Thanks! Pavel Tested-by: Pavel Machek <pavel@xxxxxx> -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
