RE: [PATCH v2] Bluetooth: Support fast advertising interval

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ping

> -----Original Message-----
> From: Panda, Bharat B
> Sent: Tuesday, November 13, 2018 2:31 PM
> To: linux-bluetooth@xxxxxxxxxxxxxxx; 'Marcel Holtmann'
> <marcel@xxxxxxxxxxxx>
> Cc: Panda, Bharat B <bharat.b.panda@xxxxxxxxx>
> Subject: RE: [PATCH v2] Bluetooth: Support fast advertising interval
> 
> Soft reminder.
> 
> > -----Original Message-----
> > From: linux-bluetooth-owner@xxxxxxxxxxxxxxx [mailto:linux-bluetooth-
> > owner@xxxxxxxxxxxxxxx] On Behalf Of Bharat Bhusan Panda
> > Sent: Tuesday, October 30, 2018 3:55 PM
> > To: linux-bluetooth@xxxxxxxxxxxxxxx
> > Subject: [PATCH v2] Bluetooth: Support fast advertising interval
> >
> > Changes made to add support for fast advertising interval as per core
> > 4.1 specification, section 9.3.11.2.
> >
> > A peripheral device entering any of the following GAP modes and
> > sending either non-connectable advertising events or scannable
> > undirected advertising events should use adv_fast_interval2(100ms - 150ms)
> for adv_fast_period(30s).
> >          - Non-Discoverable Mode
> >          - Non-Connectable Mode
> >          - Limited Discoverable Mode
> >          - General Discoverable Mode
> >
> > Signed-off-by: Bharat Bhusan Panda <bharat.b.panda@xxxxxxxxx>
> > ---
> >  include/net/bluetooth/hci_core.h |  2 ++
> >  net/bluetooth/hci_request.c      | 27 +++++++++++++++++++++++++++
> >  2 files changed, 29 insertions(+)
> >
> > diff --git a/include/net/bluetooth/hci_core.h
> > b/include/net/bluetooth/hci_core.h
> > index 0db1b9b..868c2fb 100644
> > --- a/include/net/bluetooth/hci_core.h
> > +++ b/include/net/bluetooth/hci_core.h
> > @@ -1491,6 +1491,8 @@ struct hci_mgmt_chan {
> >  #define DISCOV_INTERLEAVED_INQUIRY_LEN	0x04
> >  #define DISCOV_BREDR_INQUIRY_LEN	0x08
> >  #define DISCOV_LE_RESTART_DELAY		msecs_to_jiffies(200)	/*
> > msec */
> > +#define DISCOV_LE_FAST_ADV_INT_MIN	100	/* msec */
> > +#define DISCOV_LE_FAST_ADV_INT_MAX	150	/* msec */
> >
> >  void mgmt_fill_version_info(void *ver);  int mgmt_new_settings(struct
> > hci_dev *hdev); diff --git a/net/bluetooth/hci_request.c
> > b/net/bluetooth/hci_request.c index e8c9ef1..fe43498 100644
> > --- a/net/bluetooth/hci_request.c
> > +++ b/net/bluetooth/hci_request.c
> > @@ -1092,6 +1092,33 @@ void __hci_req_enable_advertising(struct
> > hci_request *req)
> >  	else
> >  		cp.type = LE_ADV_NONCONN_IND;
> >
> > +	/* As per core 4.1 spec, section 9.3.11.2: A peripheral device
> > +	 * entering any of the following GAP modes and sending either
> > +	 * non-connectable advertising events or scannable undirected
> > +	 * advertising events should use adv_fast_interval2(100ms - 150ms)
> > +	 * for adv_fast_period(30s).
> > +	 *
> > +	 * 	- Non-Discoverable Mode
> > +	 *	- Non-Connectable Mode
> > +	 * 	- Limited Discoverable Mode
> > +	 * 	- General Discoverable Mode
> > +	 */
> > +	if (cp.type == LE_ADV_NONCONN_IND || cp.type ==
> > LE_ADV_SCAN_IND) {
> > +		/* Set the suggested min and max fast advertising interval,
> > +		 * only if the peripheral device has entered any of the modes
> > +		 * such as non-discoverable, non-connectable or limited-
> > +		 * discoverable.
> > +		 */
> > +		if (!hci_dev_test_flag(hdev, HCI_DISCOVERABLE) ||
> > +			!hci_dev_test_flag(hdev, HCI_CONNECTABLE) ||
> > +			hci_dev_test_flag(hdev, HCI_LIMITED_DISCOVERABLE))
> > {
> > +			cp.min_interval =
> > +				cpu_to_le16(DISCOV_LE_FAST_ADV_INT_MIN);
> > +			cp.max_interval =
> > +
> > 	cpu_to_le16(DISCOV_LE_FAST_ADV_INT_MAX);
> > +		}
> > +	}
> > +
> >  	cp.own_address_type = own_addr_type;
> >  	cp.channel_map = hdev->le_adv_channel_map;
> >
> > --
> > 1.9.1




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux