[ 176.929612] Bluetooth: hci_qca.c:qca_recv() hci0: Frame reassembly failed (-84)
[ 176.945734] Bluetooth: hci_qca.c:qca_recv() hci0: Frame reassembly failed (-84)
[ 176.953298] Bluetooth: hci_qca.c:qca_recv() hci0: Frame reassembly failed (-84)
[ 177.010660] Bluetooth: hci_qca.c:qca_recv() hci0: Frame reassembly failed (-84)
[ 177.067633] Bluetooth: hci_qca.c:qca_recv() hci0: Frame reassembly failed (-84)
The above errors log on console due to receiving of stray bytes
when wcn3990 boot up's i.e. when during initial setup procedure.
Signed-off-by: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
---
drivers/bluetooth/hci_qca.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 97b57e0f4725..341f80606574 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -56,6 +56,7 @@
/* Controller states */
#define STATE_IN_BAND_SLEEP_ENABLED 1
+#define STATE_DISCARD_RX 2
#define IBS_WAKE_RETRANS_TIMEOUT_MS 100
#define IBS_TX_IDLE_TIMEOUT_MS 2000
@@ -511,6 +512,7 @@ static int qca_open(struct hci_uart *hu)
} else {
hu->init_speed = qcadev->init_speed;
hu->oper_speed = qcadev->oper_speed;
+ set_bit(STATE_DISCARD_RX, &qca->flags);
ret = qca_power_setup(hu, true);
if (ret) {
destroy_workqueue(qca->workqueue);
@@ -903,6 +905,13 @@ static int qca_recv(struct hci_uart *hu, const void *data, int count)
if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
return -EUNATCH;
+ /* We discard Rx data received while device is in booting
+ * stage, this is due multiple baudrate switch is causing
+ * UART to read some garbage data.
+ */
+ if (test_bit(STATE_DISCARD_RX, &qca->flags))
+ return 0;
+
qca->rx_skb = h4_recv_buf(hu->hdev, qca->rx_skb, data, count,
qca_recv_pkts, ARRAY_SIZE(qca_recv_pkts));
if (IS_ERR(qca->rx_skb)) {
@@ -1192,10 +1201,12 @@ static int qca_setup(struct hci_uart *hu)
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
hu->hdev->shutdown = qca_power_off;
+
ret = qca_wcn3990_init(hu);
if (ret)
return ret;
+ clear_bit(STATE_DISCARD_RX, &qca->flags);
ret = qca_read_soc_version(hdev, &soc_ver);
if (ret)
return ret;
@@ -1278,8 +1289,15 @@ static void qca_power_shutdown(struct hci_uart *hu)
struct serdev_device *serdev = hu->serdev;
unsigned char cmd = QCA_WCN3990_POWEROFF_PULSE;
- host_set_baudrate(hu, 2400);
+ /* From this point we go into power off state,
+ * disable IBS and discard all the queued data.
+ */
+ clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ set_bit(STATE_DISCARD_RX, &qca->flags);
+ qca_flush(hu);
+
hci_uart_set_flow_control(hu, true);
+ host_set_baudrate(hu, 2400);
serdev_device_write(serdev, &cmd, sizeof(cmd), 0);
serdev_device_wait_until_sent(serdev, 0);
hci_uart_set_flow_control(hu, false);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
