Re: [RESEND] ti-connectivity: add firmware for CC2560(A) Bluetooth

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 12, 2018 at 9:45 PM David Lechner <david@xxxxxxxxxxxxxx> wrote:
>
> This adds TIInit_6.2.31.bts and TIInit_6.6.15.bts for TI CC2560 and
> CC2560A Bluetooth chips. These are found in LEGO MINDSTORMS EV3, which
> has mainline kernel support now.
>
> The versions listed are the ones given on the TI wiki[1] where the files
> were obtained. The version in parentheses are the ones found in the
> files themselves.
>
> These files are redistributable under the same LICENCE.ti-connectivity that
> is used by other TI firmwares.
>
> [1]: http://processors.wiki.ti.com/index.php/CC256x_Downloads
>
> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
> ---
>  WHENCE                            |   4 ++++
>  ti-connectivity/TIInit_6.2.31.bts | Bin 0 -> 50699 bytes
>  ti-connectivity/TIInit_6.6.15.bts | Bin 0 -> 15614 bytes
>  3 files changed, 4 insertions(+)
>  create mode 100644 ti-connectivity/TIInit_6.2.31.bts
>  create mode 100644 ti-connectivity/TIInit_6.6.15.bts

Applied and pushed out.

josh



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux