Hi Sakari,
On Fri, Sep 21, 2018 at 10:13:12AM +0300, Sakari Ailus wrote:
> Hi Matthias,
>
> On Thu, Sep 20, 2018 at 03:34:35PM -0700, Matthias Kaehlcke wrote:
> > Provide an API for Bluetooth drivers to retrieve the Bluetooth Device
> > address (BD_ADDR) for a device. If the device node has a property
> > 'local-bd-address' the BD address is read from this property.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > ---
> > drivers/base/property.c | 49 ++++++++++++++++++++++++++++++++++++++++
> > include/linux/property.h | 4 ++++
> > 2 files changed, 53 insertions(+)
> >
> > diff --git a/drivers/base/property.c b/drivers/base/property.c
> > index 240ab5230ff6..8fe546b9805a 100644
> > --- a/drivers/base/property.c
> > +++ b/drivers/base/property.c
> > @@ -18,6 +18,8 @@
> > #include <linux/etherdevice.h>
> > #include <linux/phy.h>
> >
> > +#define BD_ADDR_LEN 6
> > +
> > struct property_set {
> > struct device *dev;
> > struct fwnode_handle fwnode;
> > @@ -1315,6 +1317,53 @@ void *device_get_mac_address(struct device *dev, char *addr, int alen)
> > }
> > EXPORT_SYMBOL(device_get_mac_address);
> >
> > +/**
> > + * fwnode_get_bd_address - Get the Bluetooth Device Address (BD_ADDR) from the
> > + * firmware node
> > + * @fwnode: Pointer to the firmware node
> > + * @addr: Address of buffer to store the BD address in
> > + * @alen: Length of the buffer pointed to by addr, should be BD_ADDR_LEN
> > + *
> > + * Search the firmware node for 'local-bd-address'.
> > + *
> > + * All-zero BD addresses are rejected, because those could be properties
> > + * that exist in the firmware tables, but were not updated by the firmware. For
> > + * example, the DTS could define 'local-bd-address', with zero BD addresses.
> > + */
> > +int fwnode_get_bd_address(struct fwnode_handle *fwnode, u8 *addr, int alen)
>
> How about using bdaddr_t instead? The original caller was casting it to u8
> probably just because there was no function specifically for this purpose.
I was considering that, but wasn't sure if it would be 'correct' to
include net/bluetooth/bluetooth.h (with the typdef of bdaddr_t) from
property.h since it is very frugal on headers and complex types.
That said I'd also prefer to use bdaddr_t if the API isn't limited to
basic data types on purpose.
> I wonder if this also should be made depend on CONFIG_BT. The fwnode
> framework is unconditionally a part of the kernel and it's not very big at
> the moment but adding stuff little by little will add up eventually.
Sounds good!
> > +{
> > + u8 buf[BD_ADDR_LEN];
> > + int ret;
> > +
> > + if (alen != BD_ADDR_LEN)
> > + return -EINVAL;
> > +
> > + ret = fwnode_property_read_u8_array(fwnode, "local-bd-address",
> > + buf, alen);
> > + if (ret < 0)
> > + return ret;
> > + if (is_zero_ether_addr(buf))
> > + return -ENODATA;
> > +
> > + memcpy(addr, buf, BD_ADDR_LEN);
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(fwnode_get_bd_address);
> > +
> > +/**
> > + * device_get_bd_address - Get the Bluetooth Device Address (BD_ADDR) for a
> > + * given device
> > + * @dev: Pointer to the device
> > + * @addr: Address of buffer to store the BD address in
> > + * @alen: Length of the buffer pointed to by addr, should be BD_ADDR_LEN
> > + */
> > +int device_get_bd_address(struct device *dev, u8 *addr, int alen)
> > +{
> > + return fwnode_get_bd_address(dev_fwnode(dev), addr, alen);
> > +}
> > +EXPORT_SYMBOL(device_get_bd_address);
> > +
> > /**
> > * fwnode_irq_get - Get IRQ directly from a fwnode
> > * @fwnode: Pointer to the firmware node
> > diff --git a/include/linux/property.h b/include/linux/property.h
> > index ac8a1ebc4c1b..4e2f1b276f4f 100644
> > --- a/include/linux/property.h
> > +++ b/include/linux/property.h
> > @@ -287,9 +287,13 @@ int device_get_phy_mode(struct device *dev);
> >
> > void *device_get_mac_address(struct device *dev, char *addr, int alen);
> >
> > +int device_get_bd_address(struct device *dev, u8 *addr, int alen);
> > +
> > int fwnode_get_phy_mode(struct fwnode_handle *fwnode);
> > void *fwnode_get_mac_address(struct fwnode_handle *fwnode,
> > char *addr, int alen);
> > +int fwnode_get_bd_address(struct fwnode_handle *fwnode,
> > + u8 *addr, int alen);
>
> This would be a good opportunity to add a newline here, and avoid adding
> one after device_get_mac_address().
Will do
Thanks for the review!
