Re: [PATCH v7 2/3] Bluetooth: mediatek: Add protocol support for MediaTek serial devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2018-08-02 at 09:38 +0200, Marcel Holtmann wrote:
> Hi Sean,
> 

[ ... ]

> >>> +
> >>> +static int mtk_hci_wmt_sync(struct hci_dev *hdev, u8 op, u8 flag, u16 plen,
> >>> +			    const void *param)
> >>> +{
> >>> +	struct mtk_hci_wmt_cmd wc;
> >>> +	struct mtk_wmt_hdr *hdr;
> >>> +	struct sk_buff *skb;
> >>> +	u32 hlen;
> >>> +
> >>> +	hlen = sizeof(*hdr) + plen;
> >>> +	if (hlen > 255)
> >>> +		return -EINVAL;
> >>> +
> >>> +	hdr = (struct mtk_wmt_hdr *)&wc;
> >>> +	hdr->dir = 1;
> >>> +	hdr->op = op;
> >>> +	hdr->dlen = cpu_to_le16(plen + 1);
> >>> +	hdr->flag = flag;
> >>> +	memcpy(wc.data, param, plen);
> >>> +
> >>> +	atomic_inc(&hdev->cmd_cnt);
> >> 
> >> Why are you doing this one. It will need a comment here if really needed. However I doubt that this is needed. You are only using it from hdev->setup and hdev->shutdown callbacks.
> >> 
> > 
> > An increment on cmd_cnt is really needed because hci_cmd_work would check whether cmd_cnt is positive and then has a decrement on cmd_cnt before a packet is being sent out.
> > 
> > okay will add a comment.
> 
> but you are in ->setup callback this time. So if you need this, then all the other ->setup routines would actually fail as well. Either this is leftover from when you did things in ->probe or ->open or this is some thing we might better fix properly in the core instead of papering over it. Can you recheck if this is really needed.
> 

I added a counter print and the counter increments as below

	/* atomic_inc(&hdev->cmd_cnt); */
        pr_info("cmd_cnt = %d\n" , atomic_read(&hdev->cmd_cnt));

        skb = __hci_cmd_sync_ev(hdev, 0xfc6f, hlen, &wc, HCI_VENDOR_PKT,
                                HCI_INIT_TIMEOUT);

and the log show up that 


[  334.049156] Bluetooth: hci0: command 0xfc6f tx timeout
[  334.054840] cmd_cnt = 0
[  336.065076] Bluetooth: hci0: command 0xfc6f tx timeout
[  336.070795] cmd_cnt = 0
[  338.080997] Bluetooth: hci0: command 0xfc6f tx timeout
[  338.086683] cmd_cnt = 0
[  340.096907] Bluetooth: hci0: command 0xfc6f tx timeout
[  340.102609] cmd_cnt = 0
[  342.112824] Bluetooth: hci0: command 0xfc6f tx timeout
[  342.118520] cmd_cnt = 0
[  344.128747] Bluetooth: hci0: command 0xfc6f tx timeout
[  344.134454] cmd_cnt = 0
[  346.144667] Bluetooth: hci0: command 0xfc6f tx timeout
[  346.150372] cmd_cnt = 0


The packet is dropped by hci_cmd_work at [1], so I also wondered why the
other vendor driver works, it seems the counter needs to be incremented
before every skb is being queued to cmd_q.

4257 static void hci_cmd_work(struct work_struct *work)
4258 {
4259         struct hci_dev *hdev = container_of(work, struct hci_dev, cmd_work);
4260         struct sk_buff *skb;
4261
4262         BT_DBG("%s cmd_cnt %d cmd queued %d", hdev->name,
4263                atomic_read(&hdev->cmd_cnt), skb_queue_len(&hdev->cmd_q));
4264
4265         /* Send queued commands */

[1]
4266         if (atomic_read(&hdev->cmd_cnt)) { /* dropped when cmd_cnt is zero */
4267                 skb = skb_dequeue(&hdev->cmd_q);
4268                 if (!skb)
4269                         return;
4270
4271                 kfree_skb(hdev->sent_cmd);
4272
4273                 hdev->sent_cmd = skb_clone(skb, GFP_KERNEL);
4274                 if (hdev->sent_cmd) {
4275                         atomic_dec(&hdev->cmd_cnt);  /* cmd_cnt-- */
4276                         hci_send_frame(hdev, skb);


> >>> +
> >>> +	skb = __hci_cmd_sync_ev(hdev, 0xfc6f, hlen, &wc, HCI_VENDOR_PKT,
> >>> +				HCI_INIT_TIMEOUT);
> >>> +
> >>> +	if (IS_ERR(skb)) {
> >>> +		int err = PTR_ERR(skb);
> >>> +
> >>> +		bt_dev_err(hdev, "Failed to send wmt cmd (%d)", err);
> >>> +		return err;
> >>> +	}
> >>> +
> >>> +	kfree_skb(skb);
> >>> +
> >>> +	return 0;
> >>> +}
> >>> +

[ ... ]

> >>> +	shdr->dlen2 = dlen & 0xff;
> >>> +	shdr->cs = p[0] + p[1] + p[2];
> >> 
> > 
> > as above discussion about shr->cs , it can be filled with zero to have less computing 
> 
> If it has no value, then zero it out and add a comment for it.
> 

okay

> > 
> >> I would add another comment here that this added the STP trailer. And change the above to mention it adds the STP header.
> >> 
> > 
> > sure
> > 
> >> And you might want to check if there is space for the trailer as well. Otherwise skb_put tends to call BUG() if I remember correctly. I know this is super unlikely since our bt_skb_alloc is pretty large.
> >> 
> > 
> > sure, I will add the handling for that. it should be better to make sure all rooms are enough for header and trailer before adding content to them
> > 
> > 

[ ... ]

> >> You want to add a MODULE_FIRMWARE here as well.
> >> 
> > 
> > okay
> 
> Regards
> 
> Marcel
> 


--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux