[PATCH v8 4/7] Bluetooth: hci_qca: Add wrapper functions for setting UART speed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In function qca_setup, we set initial and operating speeds for Qualcomm
Bluetooth SoC's. This block of code is common across different
Qualcomm Bluetooth SoC's. Instead of duplicating the code, created
a wrapper function to set the speeds. So that future coming SoC's
can use these wrapper functions to set speeds.

Signed-off-by: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
---
Changes in v8:
    * common function to set INIT and operating speeds.
    * moved hardware flow control to qca_set_speed().
	
Changes in v7:
    * initial patch
    * created wrapper functions for init and operating speeds.
---
 drivers/bluetooth/hci_qca.c | 89 +++++++++++++++++++++++++++----------
 1 file changed, 65 insertions(+), 24 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index fe62420ef838..38b7dbe6c897 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -119,6 +119,11 @@ struct qca_data {
 	u64 votes_off;
 };
 
+enum qca_speed_type {
+	QCA_INIT_SPEED = 1,
+	QCA_OPER_SPEED
+};
+
 struct qca_serdev {
 	struct hci_uart	 serdev_hu;
 	struct gpio_desc *bt_en;
@@ -923,6 +928,60 @@ static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
 		hci_uart_set_baudrate(hu, speed);
 }
 
+static unsigned int qca_get_speed(struct hci_uart *hu,
+				  enum qca_speed_type speed_type)
+{
+	unsigned int speed = 0;
+
+	if (speed_type == QCA_INIT_SPEED) {
+		if (hu->init_speed)
+			speed = hu->init_speed;
+		else if (hu->proto->init_speed)
+			speed = hu->proto->init_speed;
+	} else {
+		if (hu->oper_speed)
+			speed = hu->oper_speed;
+		else if (hu->proto->oper_speed)
+			speed = hu->proto->oper_speed;
+	}
+
+	return speed;
+}
+
+static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
+{
+	unsigned int speed, qca_baudrate;
+	int ret;
+
+	if (speed_type == QCA_INIT_SPEED) {
+		speed = qca_get_speed(hu, QCA_INIT_SPEED);
+		if (speed)
+			host_set_baudrate(hu, speed);
+		else
+			bt_dev_err(hu->hdev, "Init speed should be non zero");
+
+		return 0;
+	}
+
+	speed = qca_get_speed(hu, QCA_OPER_SPEED);
+	if (!speed) {
+		bt_dev_err(hu->hdev, "operating speed should be non zero");
+		return 0;
+	}
+
+	qca_baudrate = qca_get_baudrate_value(speed);
+	bt_dev_info(hu->hdev, "Set UART speed to %d", speed);
+	ret = qca_set_baudrate(hu->hdev, qca_baudrate);
+	if (ret) {
+		bt_dev_err(hu->hdev, "Failed to change the baudrate (%d)", ret);
+		return ret;
+	}
+
+	host_set_baudrate(hu, speed);
+
+	return ret;
+}
+
 static int qca_setup(struct hci_uart *hu)
 {
 	struct hci_dev *hdev = hu->hdev;
@@ -937,35 +996,17 @@ static int qca_setup(struct hci_uart *hu)
 	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 
 	/* Setup initial baudrate */
-	speed = 0;
-	if (hu->init_speed)
-		speed = hu->init_speed;
-	else if (hu->proto->init_speed)
-		speed = hu->proto->init_speed;
-
-	if (speed)
-		host_set_baudrate(hu, speed);
+	qca_set_speed(hu, QCA_INIT_SPEED);
 
 	/* Setup user speed if needed */
-	speed = 0;
-	if (hu->oper_speed)
-		speed = hu->oper_speed;
-	else if (hu->proto->oper_speed)
-		speed = hu->proto->oper_speed;
+	ret = qca_set_speed(hu, QCA_OPER_SPEED);
+	if (ret)
+		return ret;
 
-	if (speed) {
+	speed = qca_get_speed(hu, QCA_OPER_SPEED);
+	if (speed)
 		qca_baudrate = qca_get_baudrate_value(speed);
 
-		bt_dev_info(hdev, "Set UART speed to %d", speed);
-		ret = qca_set_baudrate(hdev, qca_baudrate);
-		if (ret) {
-			bt_dev_err(hdev, "Failed to change the baud rate (%d)",
-				   ret);
-			return ret;
-		}
-		host_set_baudrate(hu, speed);
-	}
-
 	/* Setup patch / NVM configurations */
 	ret = qca_uart_setup(hdev, qca_baudrate, QCA_ROME, soc_ver);
 	if (!ret) {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux