Hi, On Thursday, 21 June 2018 09:59:17 CEST Jagan K wrote: > Hi Szymon, > > On Tue, Jun 19, 2018 at 3:25 PM, Szymon Janc <szymon.janc@xxxxxxxxxxx> wrote: > > Hi Jaganath, > > > > On Tuesday, 24 April 2018 15:50:33 CEST Jaganath Kanakkassery wrote: > > > Jaganath Kanakkassery (18):PI for Get, Set PHY Configuration and setting > > > of PHY in Advertising. Also implemented extended advertising, > > > scanning and connection. > > > > > > v2: Fixed kbuild warnings > > > > > > Bluetooth: Introduce helpers for LE set scan start and complete > > > Bluetooth: Use extended scanning if controller supports > > > Bluetooth: Process extended ADV report event > > > Bluetooth: Introduce helpers for le conn status and complete > > > Bluetooth: Use extended LE Connection if supported > > > Bluetooth: Define PHY flags in hdev and set 1M as default > > > Bluetooth: Implement Get PHY Configuration mgmt command > > > Bluetooth: Implement Set PHY Confguration command > > > Bluetooth: Set Scan PHYs based on selected PHYs by user > > > Bluetooth: Handle extended ADV PDU types > > > Bluetooth: Use selected PHYs in extended connect > > > Bluetooth: Read no of adv sets during init > > > Bluetooth: Impmlement extended adv enable > > > Bluetooth: Use Set ext adv/scan rsp data if controller supports > > > Bluetooth: Implement disable and removal of adv instance > > > Bluetooth: Use ext adv for directed adv > > > Bluetooth: Implement Set ADV set random address > > > Bluetooth: Implement secondary advertising on different PHYs > > > > > > include/net/bluetooth/hci.h | 195 ++++++++++++++ > > > include/net/bluetooth/hci_core.h | 19 ++ > > > include/net/bluetooth/mgmt.h | 37 +++ > > > net/bluetooth/hci_conn.c | 191 ++++++++++--- > > > net/bluetooth/hci_core.c | 29 +- > > > net/bluetooth/hci_event.c | 478 +++++++++++++++++++++++++++----- > > > net/bluetooth/hci_request.c | 568 > > > > > > +++++++++++++++++++++++++++++++++------ net/bluetooth/hci_request.h > > > | > > > > > > 8 + > > > net/bluetooth/hci_sock.c | 1 + > > > net/bluetooth/mgmt.c | 281 ++++++++++++++++++- > > > 10 files changed, 1613 insertions(+), 194 deletions(-) > > > > I did some basic tests with Advertising Extension enabled Apache Mynewt > > controller and it seems like advertising is not re-enabled after > > disconnection (it is if legacy HCI commands are used). > > Thanks for testing the patches. But i could not reproduce the issue in > my testing. > Can you plz provide btmon logs of the issue? As discussed off-list, controller I tested with supports advertising while connected so it was already enabled after connection, not after disconnect. So all good! -- pozdrawiam Szymon Janc -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
